4
ENGLISH
4
Finish the procedure.
Setting the clock
1
Turn on the power.
2
Enter Function Control settings.
3
Turn the control knob to make a
selection, then press to confirm.
1
:
00
4
Adjust the hour.
Preparation
[Hold]
The display demonstration is always turned on
unless you cancel it.
When you turn on the power (or after you reset
the unit), the display shows:
“CANCEL”
=
“DEMO”
=
“PRESS”
=
“VOL KNOB”
•
If no operation is done for about 15 seconds,
“DEMO START”
appears and the display
demonstration starts.
To cancel the display demonstration:
1
Press the control knob.
“NO/<YES>”
is shown on the display.
2
Press the control knob again to select
“YES”
.
“DEMO OFF”
appears on the display.
•
If
“NO”
is selected,
“DEMO START”
appears and the display demonstration
starts.
You can also cancel the display demonstration
from the Function Control settings, see the
following:
Canceling the display
demonstration
1
Turn on the power.
2
Enter Function Control settings.
3
Turn the control knob to make a
selection, then press to confirm.
EN02-11_KDV-MP3346M[U]f.indd 4
EN02-11_KDV-MP3346M[U]f.indd 4
11/19/09 4:44:16 PM
11/19/09 4:44:16 PM
