16
Faults and Error Codes
If you spill liquid onto the control panel your hob will display flashing ‘F’s” and will beep. Don’t worry your hob
hasn’t developed a fault it just thinks all the controls are being press. Wipe off the liquid and dry the control panel
and the display will go back to normal and the beeping will stop.
If your hob develops an error it will display an error code from E1 to E9 depending on the error. Follow the advice
in the table below if an error code is displayed.
Error Code
Advice
E1
Cooling fan is disabled. Call an authorised service agent.
E3
The supply voltage is different to the rated value for the hob. Press the POWER control to switch
the hob off. Wait for it to cool down (the ‘H’ have disappeared from the display). The switch the
hob back on. If the error code is still displayed call an authorised service agent.
E4
The supply frequence is different to the rated value for the hob. Press the POWER control to
switch the hob off. Wait for it to cool down (the ‘H’ have disappeared from the display). The
switch the hob back on. If the error code is still displayed try switching the hob off at the mains.
Then switch it back on again, this should reset the hob. If the error code is still displayed call an
authorised service agent.
E5
The internal temperature of the hob is to high. Switch the hob off and allow it to cool down.
E6
Communication error between the control panel and the heater. Call an authorised service
agent.
E7
Coil temperature sensor is disabled. Call an authorised service agent.
E8
Cooler temperature sensor is disabled. Call an authorised service agent.
E9
Calibration error. Call an authorised service agent.
Hob Child Lock
Once you have selected a power level for a cooking zone you can lock the hob so if the control knobs are
adjusted the hob level won’t change.
1. Select a hob cooking zone and choose your desired power level.
2. Press and hold the + and - Timer buttons until the hob beeps and the display flashes. You will see followed
by a power level e.g. flashing in the display. Now you won’t be able to select or change any hob cooking
zone.
3. To deactivate the Child lock either switch off the hob cooking zones, or press and hold the + and - Timer
buttons until you hear a beep sound.
Kenwood Free Standing Electric Double Oven KDOI60X20 Manual.indd 16
Kenwood Free Standing Electric Double Oven KDOI60X20 Manual.indd 16
18/01/2021 14:36
18/01/2021 14:36
