Kenwood KDC-X8529, Руководство по обслуживанию

Страница: 6 / 54

6
KDC-MP828/W7531/W7531Y/W8531
/W8531Y/X789/X8529/X889
MICROCOMPUTER’S TERMINAL DESCRIPTION
●
SYSTEM MICROCOMPUTER : IC102 (X34- : ELECTRIC UNIT)
Pin No. Pin Name I/O Function Processing Operation
1 VREF - Analog reference voltage
2 AVCC -
3 LX DATA S I Data from slave unit
4 LX DATA M O Data to slave unit
5 LX CLK I/O LX-BUS clock
6 WIRED REMO I External display remoter controller
7 LX MUTE I Mute request from slave unit H : MUTE ON, L : MUTE OFF
8 AUD SDA O E-VOL data SPI communication
9 AUD SEL O E-VOL control SPI communication
10 AUD SCL O E-VOL clock SPI communication
11 DAC RST O DAC reset L : DAC RESET
12 NC - Not used
13 BYTE - GND
14 CNVSS -
15 XCIN I Clock 32,768kHz
16 XCOUT I Clock 32,768kHz
17 RESET I Reset
18 XOUT - Clock 12MHz
19 VSS - GND
20 XIN - Clock 12MHz
21 VCC1 -
22 NMI I
23 PANEL DET I Panel detection H : No panel, L : Panel exists
24 RDS CLK I RDS decoder clock
25 LX REQ S I Communication request from slave unit
26 PON AM I/O AM power supply control AM in operation : H, AM not in operation : HI-Z
27 LX REQ M O Communication request to slave unit
28 TUN IFC OUT I Front-end IFC out H : Station exists, L : No station
29 RDS AFS L I/O Time constant switching when noise detected Refer to Truth Value Table (RDS AFS)
30 RDS AFS M I/O Time constant switching when noise detected Refer to Truth Value Table (RDS AFS)
31 RDS QUAL I RDS decoder QUAL
32 RDS DATA I RDS decoder DATA
33 PWIC BEEP O Beep
34 TUN SCL I/O Front-end I2C clock MAX 400kHz
35 TUN SDA I/O Front-end I2C data
36 SYS DATA O Inside-panel communication data MAX 500kbps
37 VCC1 -
38 PAN DATA I Inside-panel communication data MAX 500kbps
39 VSS -
40 SYS REQ O Communication request from system
µ
-com
41 PAN REQ I Communication request from panel
42 SDA I/O E2PROM I2C data MAX 100kHz
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299