Kenwood KDC-X790 Скачать руководство пользователя страница 21

Страница: 21 / 62

KDC-W8534/W8534Y
KDC-X790

DC OFFSET ERROR

Display Example

PROTECT

Blink alternately

at 1Hz

(

CD LOAD ERROR DETECTION

●

Overview

Record the number of times when mechanism error (SW er-

ror) occurred at CD LOAD.

LOAD error recording shall be done in 2 patterns, by the SW

status illustrated below.

LOAD error is established when LOAD operation is not com-

pleted after LOAD operation is started before the protect timer

count is completed.

Clearing of record is done in the following situations:

1) After reset is cancelled, when reading EEPROM, the code

is NG.

2) While in test mode, the specified key (Play/Pause key

pressed for 2 seconds) input.

3) When in EEPROM all-clear initialization mode (refer to

the test mode specification document)

• Display is shown on the test mode specification document.

• Number of times with error(s) is 99 at MAX.

• Not recorded in test mode [1+3 keys].

●

Operation

∗

Trigger for starting the sequence: detecting the inserted disc

with SW 1 and 3 LOW edge.

(As an exception, protect LOAD when EJECT error)

If the protect timer was counted up before the LOS (SW1)

up edge detection, it is recorded as LOAD_ERR1.

If the protect timer was counted up after the LOS (SW1) up

edge detection, before the LOE/LIM (SW4) up edge detec-

tion, it is recorded as LOAD_ERR2

∗

When DISC was inserted briefly but pulled out immediately

(DISC is detected but not inserted), it is considered as an

error.

Special case: Even if LOS (SW1) up edge is not detected, if

LOE/LIM (SW4) up edge is detected, it is still recorded as

LOAD_ERR1. Also, if SW4 up edge is detected, the motor is

stopped.

∗

The purpose is to shut down audio output. Basically, the

logic sets the audio output system signal line when in

Standby source.

3. Key specification

• No specific limitation (Normal operation).

4. Display specification

• Display the “PROTECT” string and blink all characters at

1Hz.

∗

Use the indication below with the highest priority (error mes-

sage), and maintain the error message even when the

source is changed.

●

Cancel Condition

• Press the Reset terminal on the main body. or set Backup

to OFF (Unplug and plug back in the DC connector).

The history is maintained (E2PROM data is saved).

●

Note while in test mode

• While in test mode, even if DC leak is detected, it is not

written into E2PROM.

When an error is detected, the display is enabled.

●

Other

• Function for checking and clearing data in E2PROM by a

given key shall be included.

(Used at production dpt. and service center, etc.)

SW1
(LOS SW)

SW3
(12EJE SW)

SW4
(LOE/LIM SW)

LOAD_ERR1

LOAD_ERR2

LOAD

ERR condition

Effect

Содержание KDC-X790































































Результаты поиска

Содержание KDC-X790

Отзывы:

Похожие инструкции для KDC-X790

Бренды по названию

Популярные бренды

Kenwood KDC-X790, Руководство по обслуживанию

Результаты поиска

Содержание KDC-X790

Отзывы:

Похожие инструкции для KDC-X790

Бренды по названию

Популярные бренды