background image

6

   

|

   

English

Handling CDs

•  Don’t touch the recording surface of the CD.

•  CD-R and CD-RW are easier to damage than a 

normal music CD. Use a CD-R or a CD-RW after 
reading the caution items on the package etc.

•  Don’t stick tape etc. on the CD.

Also, don’t use a CD with tape stuck on it.

When using a new CD

If the CD center hole or outside rim has burrs, use it 
after removing them with a ball pen etc.

CD accessories

Don’t use disc type accessories.

CD cleaning

Clean from the center of the disc and move 
outward.

About CDs

Burrs

Burrs

Removing CDs

When removing CDs from this unit pull them out 
horizontally.

CDs that can’t be used

•  CDs that aren’t round can’t be used.

•  CDs with coloring on the recording surface or that 

are dirty can’t be used.

•  This unit can only play the CDs with 

  It may not correctly play discs which do not have 

the mark.

•  A CD-R or CD-RW that hasn’t been finalized can’t 

be played. (For the finalization process refer to 
your CD-R/CD-RW writing software, and your CD-
R/CD-RW recorder instruction manual.)

CD storage

•  Don’t place them in direct sunlight (On the seat 

or dashboard etc.) and where the temperature is 
high.

•  Store CDs in their cases.

B64-2985-00̲M̲English̲r0.Indd   6

B64-2985-00̲M̲English̲r0.Indd   6

04.11.16   6:45:01 PM

04.11.16   6:45:01 PM

Содержание KDC-X7529







































Отзывы: