30
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Do the required wiring.
( 31)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1
Detach the faceplate.
2
Fit the catch pin on the extraction keys into
the holes on both sides of the trim plate, then
pull it out.
3
Insert the extraction keys deeply into the slots
on each side, then follow the arrows as shown
on the illustration.
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
INSTALLATION/CONNECTION
Part list for installation
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
[
terminal of the car battery.
2
Connect the wires properly.
See Wiring connection.
( 31)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
4
Connect the
[
terminal of the car battery.
5
Press
to turn on the power.
6
Detach the faceplate and reset the unit within 5 seconds. ( 3)
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
(F)
Screws
When installing without the
mounting sleeve
1
Remove the mounting sleeve and trim plate
from the unit.
2
Align the holes in the unit (on both sides)
with the vehicle mounting bracket and secure
the unit with screws (supplied).
Use only the specified screws. Using wrong
screws might damage the unit.
JS_KWD_KDC_X5200BTM_M2N_EN_3.indd 30
JS_KWD_KDC_X5200BTM_M2N_EN_3.indd 30
8/18/2017 4:29:22 PM
8/18/2017 4:29:22 PM
