Kenwood KDC-X5100BT, Инструкция по эксплуатации

Страница: 17 / 120

ENGLISH
13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
PHONE BOOK (Applicable only if the phone supports PBAP.)
1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook
contains many contacts).
The first menu (ABCDEFGHIJKLMN) appears.
• To go to the other menu (OPQRSTUVWXYZ1
*
), press
J
/
K
.
• To select the desired first letter, turn the volume knob or press
S
/
T
, then
press the knob.
Select “1” to search with numbers and select “
*
” to search with symbols.
2
Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
• The phonebook of the connected phone is automatically transferred to the unit when
pairing.
•
Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL.
• This unit can display only non-accent letters. (Accent letters such as “Ú” is shown as “U”.)
NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2
Press
S / T
to move the entry position.
Repeat steps 1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to control the phone
functions.
( Make a call using voice recognition)
BATTERY LVL LOW / MID / FULL
*
: Shows the strength of the battery.
NO SIGNAL / SIGNAL LVL LOW / MID / MAX
*
: Shows the strength of the current received signal.
* Functionality depends on the type of the phone used.
Make a call using voice recognition
1 Press and hold to activate the voice recognition of the connected phone.
2
Speak the name of the contact you want to call or the voice command to control
the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
BLUETOOTH®
Make a call
You can make a call from the call history, phonebook, or
dialing the number. Call by voice is also possible if your
mobile phone has the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press
again to switch to another phone.
“(Second device name)” appears.
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected/
activated or follow the instructions stated on the
selected item.
4
Press and hold to exit.
To return to the previous setting item, press .
CALL HISTORY (Applicable only if the phone supports PBAP.)
1 Press the volume knob to select a name or a phone
number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown
on the lower part of the display to indicate the
previous call status.
• Press
DISP
to change the display category
(NUMBER or NAME).
• “NO DATA” appears if there is no recorded call
history.
2
Press the volume knob to call.
JS_KWD_KDC_X5100BT_EN_EN_3.indd 13 JS_KWD_KDC_X5100BT_EN_EN_3.indd 13 11/14/2016 5:01:29 PM 11/14/2016 5:01:29 PM