10
|
English
General features
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed, the Attenuator
turns ON and OFF.
When it’s ON, the "ATT" indicator blinks.
System Q
You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed, the sound
setting switches.
Sound setting
Display
User memory
"USER"
Rock
"ROCK"
Pops
"POPS"
Easy
"EASY"
Top 40
"TOP40"
Jazz
"JAZZ"
Natural
"NATURAL"
• User memory: The values set on the <Audio Control>
(page 10).
• Each setting value is changed with the <Speaker
Setting> (page 11).
First, select the speaker type with the Speaker setting.
Audio Control
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
4
Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Subwoofer level *¹
"SW L"
–15 — +15
Bass level*²
"BAS L"
–8 — +8
Middle level*²
"MID L"
–8 — +8
Treble level*²
"TRE L"
–8 — +8
Balance
"BAL"
Left 15 — Right 15
Fader
"FAD"
Rear 15 — Front 15
Exit Audio Control mode
• *
1
You can control this item when <Switching preout>
(page 26) is set to "SWPRE SW".
• *
1
You can control this item when <Subwoofer
Output> (page 11) is set to "SW ON".
• *
2
Source tone memory: The set up value is put in the
memory per source.
5
Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[ATT]/ [ANG] button.
B64-2977-00̲E̲English̲r0.Indd 10
B64-2977-00̲E̲English̲r0.Indd 10
04.11.16 3:59:52 PM
04.11.16 3:59:52 PM
