Kenwood KDC-W4537U Скачать руководство пользователя страница 37

Страница: 37 / 40

English

USB device source

The USB device is not detected.

✔

The USB connector is disconnected.

☞

Connect the connector of the USB device

properly.

The USB device does not play its audio files.

✔

The USB connector is disconnected.

☞

Connect the connector of the USB device

properly.

The messages shown below display your
systems condition.

EJECT:

• No disc magazine has been loaded in

the changer. The disc magazine is not
completely loaded.

• No CD in the unit.

NO DISC:

No disc has been loaded in the disc
magazine.

TOC ERR:

• No disc has been loaded in the disc

magazine.

• The CD is quite dirty. The CD is upside-

down. The CD is scratched a lot.

READ ERR:

• The number of files or folders which are

stored in the connected USB device is above
the limitation.

• The file system of the connected USB device

is broken.

➪

Copy the files and folders for the USB

device again referring to http://www.
kenwood.com/usb/. If the error message is
still displayed, initialize the USB device or
use other USB devices.

E-05:

The disc is unreadable.

BLANK:

Nothing has been recorded on the MD.

NO TRACK:

No tracks are recorded on the MD, although it
has a title.

NO PANEL:

The faceplate of the slave unit being
connected to this unit has been removed.

E-77:

The unit is malfunctioning for some reason.

➪

Press the reset button on the unit. If the

"E-77" code does not disappear, consult
your nearest service center.

E-99:

Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.

➪

Check the disc magazine. And then press

the reset button on the unit. If the "E-99"
code does not disappear, consult your
nearest service center.

LOAD:

Discs are being exchanged in the Disc
changer.

READING:

The unit is reading the data on the disc.

HOLD:

The protective circuit in the unit activates
when the temperature inside the automatic
disc changer exceeds 60°C (140°F), stopping
all operation.

➪

Cool down the unit by opening the

windows or turning on the air conditioner.
As the temperature falls below 60°C
(140°F), the disc will start playing again.

B64-3546-00̲English.indd 37

06.12.26 11:26:27 AM

Содержание KDC-W4537U









































Результаты поиска

Содержание KDC-W4537U

Отзывы:

Бренды по названию

Популярные бренды

Kenwood KDC-W4537U, Инструкция по эксплуатации

Результаты поиска

Содержание KDC-W4537U

Отзывы:

Бренды по названию

Популярные бренды