![Kenwood KDC-W427 Скачать руководство пользователя страница 25](http://html.mh-extra.com/html/kenwood/kdc-w427/kdc-w427_instruction-manual_1955871025.webp)
English
|
25
Removing the Unit
Removing the Unit
1
Refer to the section 'Removing the hard rubber
frame' (page 25) and then remove the hard
rubber frame.
2
Remove the screw (M4 × 8) on the back panel.
3
Insert the two removal tools deeply into the slots
on each side, as shown.
4
Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
• Be careful to avoid injury from the catch pins on the
removal tool.
5
Pull the unit all the way out with your hands,
being careful not to drop it.
Removing the hard rubber frame
1
Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
2
When the upper level is removed, remove the
lower two locations.
• The frame can be removed from the bottom side in the
same manner.
Accessory
2
Removal tool
Lock
Accessory
2
Removal tool
Screw (M4X8)
(commercially available)
B64-2807-00̲U.S.Inddtcsp 25
03.12.11, 6:27:34 PM
Содержание KDC-W427
Страница 86: ...KDC W427 E2 Cover Indd 86 03 12 11 4 26 08 PM ...
Страница 87: ...KDC W427 E2 Cover Indd 87 03 12 11 4 26 10 PM ...
Страница 88: ...KDC W427 E2 Cover Indd 88 03 12 11 4 26 11 PM ...