32
|
KDC-U7049BT/ KDC-U7049BTL/ KDC-U6049/ KDC-U6049L
Bluetooth setup
Function of KDC-U7049BT, KDC-U7049BTL, KCA-BT300/BT200 (Optional Accessory)
Setting a voice command for category
Add a voice tag to the phone number category
(type) for voice calling.
Enter Bluetooth mode
KDC-U7049BT
KDC-U7049BTL
Press the [
] button.
KDC-U6049
KDC-U6049L
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
Enter Function setting mode
Press the Control knob for at least 1 second.
Select Phonebook type edit mode
The item can be selected and determined as
follows.
“Settings”
>
“Voice Tag”
>
“PN Type Edit”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
Select the category (type) you wish to set
Turn the Control knob to select category name,
and then press the Control knob.
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”
Select a mode
Turn the Control knob.
Display
Operation
“Register”
Register a voice tag.
“Check”*
Play a voice tag.
“Delete”*
Delete a voice tag.
* KCA-BT300/BT200 only. Displayed only when a name for
which a voice tag has been registered is selected.
Register the category (type) by performing
steps 6 to 7 in <Adding a voice dialing
command> (page 31).
Exit Bluetooth mode
Press the [SRC] button.
⁄
•
Set the voice tag for all the 5 categories. If the voice tag is
not registered for all the categories, the Phonebook may
not be recalled by voice command.
Bluetooth detail setting
Configures initial settings of this unit.
Enter Bluetooth mode
KDC-U7049BT
KDC-U7049BTL
Press the [
] button.
KDC-U6049
KDC-U6049L
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
Enter Function setting mode
Press the Control knob for at least 1 second.
Select Bluetooth detail setting mode
The item can be selected and determined as
follows.
“Settings”
>
“Detailed Settings”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
Select the desired Bluetooth detail setting
item
Turn the Control knob to select Bluetooth detail
setting item, and then press the Control knob.
Display
Overview
“Detailed Settings”
“Auto Answer”
This function automatically answers (responds
to) a call after lapse of the preset time interval
for automatic answer.
“OFF”
: Does not answer the phone call
automatically.
“0”
: Automatically answers the phone call
at once.
“1SEC” – “8SEC” – “99SEC”
:
Automatically answers the phone call after
lapse of 1 – 99 seconds.
“Auto Reconnect”
When “ON” is selected, re-pairing with the
registered Bluetooth device starts automatically
when pairing is disconnected.
“ON” / “OFF”
“Bluetooth HF”
“Bluetooth HF/
Audio”
You can specify output speakers for hands-free
voice communication and Bluetooth audio
sound.
“Front”
: Outputs sound from the front
speakers.
“All”
: Outputs sound from the front and rear
speakers.
“Call Beep”
You can output a beep from the speaker when
a call comes in.
“ON”
: Beep is heard.
“OFF”
: Beep is canceled.
IM327̲Ref̲M̲en̲01.indd 32
IM327̲Ref̲M̲en̲01.indd 32
11/05/20 9:58
11/05/20 9:58
