8
BLUETOOTH®
You can operate Bluetooth devices using this unit.
You can either use the built-in microphone located on
the faceplate or connect the external microphone.
• For microphone selection,
(
➜
10, MIC SELECT)
Built-in microphone
position
Connect the microphone
If you turn off the unit or detach the control panel
during a phone call conversation, the Bluetooth
connection is disconnected. Continue the
conversation using your mobile phone.
Supported Bluetooth profiles
• Hands-Free Profile (HFP)
• Serial Port Profile (SPP)
• Phonebook Access Profile (PBAP)
• Object Push Profile (OPP)
• Advanced Audio Distribution Profile (A2DP)
• Audio/Video Remote Control Profile (AVRCP)
Pair a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and the
device. Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the
unit.
• Up to five devices can be registered (paired) in total.
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.
• This unit supports Secure Simple Pairing (SSP).
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit
manually. Refer to the instruction manual of the Bluetooth device for more information.
1
Press
L
SRC
to turn on the unit.
2
Search and select this unit model name (KDC-U5**BT) on the Bluetooth device.
“PAIRING”
\
“PASS XXXXXX”
\
Device name
\
“PRESS”
\
“VOLUME KNOB” scrolls on the display.
3
Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed and “BT” will light up when the Bluetooth connection is
established.
• For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately
after searching.
• Pairing request (via Bluetooth) is automatically activated if an iPhone/iPod touch is connected through the USB
input terminal. (Applicable only if
[AUTO PAIRING]
is set to
[ON]
.)
(
➜
10)
Press the volume knob to pair once you have confirm the passcode.
Bluetooth test mode
You can check the connectivity of the supported profile between the Bluetooth device and the unit.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select
[BT TEST MODE]
, then press the knob.
“PLEASE PAIR YOUR PHONE” appears.
3
Search and select this unit model name (KDC-U5**BT) on the Bluetooth device.
4
Press the volume knob to start pairing and begin the test mode.
“PAIRING” flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING : Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
• To cancel, press
.
Adjust the microphone angle
Secure using cord
clamps (not supplied)
if necessary.
MIC (Microphone
input terminal)
Microphone, KCA-MC10
(optional accessory)
Rear panel
EN_KDC-U556BT[M]_4.indd 8
EN_KDC-U556BT[M]_4.indd 8
10/23/12 4:57:20 PM
10/23/12 4:57:20 PM
