18
English
Switching between Two Connected
Cell-phones
1
Press to enter Bluetooth mode.
2
Press and hold .
■
■
You cannot switch between the connected
cell-phones during downloading of the
Phone Book.
■
■
Only the main cell-phone from which you
can make a call.
■
■
Both the main and sub cell-phones can
receive an incoming call.
■
■
If the other cell-phone receives an incoming
call while you are talking on the active
cell-phone, you must finish the current call
to answer the incoming call to the other
cell-phone.
■
■
If the main cell-phone is disconnected when
it is taken out of the vehicle, the sub cell-
phone becomes the main cell-phone if it is
held connected. When the disconnected
cell-phone is brought back into the vehicle,
it is reconnected as the sub cell-phone.
Clearing the disconnection message
Press to “HF DISCONCT” disappears.
Downloading the Phone Book
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone
book is downloaded automatically after
Bluetooth connection.
■
■
Setting on the cell-phone may be required.
■
■
Up to 1000 phone numbers can be
registered for each registered cell-phone.
■
■
Up to 32 digits can be registered for each
phone number along with up to 20*
characters representing a name.
(* 20: Number of alphabetical characters.
Fewer characters can be input depending
on the type of characters.)
■
■
If no phone book data is found in the unit
even after the compete display, your cell-
phone may not support a phone book data
automatic downloading function. In this
case, try downloading manually.
To download from the cell-phone manually
Use this procedure when your cell-phone
does not support the Phone Book Access
Property (PBAP).
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select
[SETTINGS]
, then press to enter.
3
Turn the volume knob to select
[TRANSFER PB]
, then press to enter.
“DL PB ***” is displayed.
4
By operating the cell-phone, send the
phone book data to this unit
By operating the cell-phone, download the
phone book data to this unit.
5
When downloading is completed, press
the volume knob.
■
■
The manually downloaded phone book
data can contain up to 400 phone numbers.
■
■
When you switch between the connected
cell-phones, the manually downloaded
phone book data is deleted.
■
■
To cancel downloading of the phone book
data, operate the cell-phone.
Using the remote controller (RC-
405)
Making a call:
:
Enter Bluetooth mode.
5
/
∞
:
Selects a dialing method.
ENT
38
:
Enter dialing mode
DIRECT :
Make a call
1 — 6 :
Selects preset dial.
0 — 9 :
Input a digit in number dial mode.
#FM+ :
Input “#” in number dial mode.
*AM– :
Input “*” in number dial mode.
+
¢
:
Input “+” in number dial mode.
4
:
Clear the entered phone number.
Receiving a call:
:
Answer the call.
During a call:
SRC :
End the call.
ENT
38
:
Switch between the private talk
mode and the hands-free talk
mode.
B64-4920-00_02_M_English.indd 18
11/12/21 9:43
