10
English
Listening to the Radio
1
Press
SRC
to select “TUNER”.
2
Press
BAND
repeatedly to select a band
(FM1/ FM2/ FM3/ AM).
3
Press
4
/
¢
to search for a station.
Using the remote controller (RC-405)
#FM+ / *AM–
:
Selects band.
4
/ +
¢
:
Selects station.
1 – 6
:
Selects preset station.
Changing the frequency steps
You can change the frequency step of FM/
AM:
FM : 50 kHz to 200 kHz
AM : 9 kHz to 10 kHz
1
Press and hold
SRC
to turn off the
power.
■
Press and hold for about 2 seconds to memorize the current station.
■
Press briefly to recall memorized station.
2
While pressing number buttons
1
and
5
,
press
SRC
.
Release your fingers from the buttons after
the display appears.
■
To restore the initial setting, repeat the same
procedure.
■
When the frequency step is changed, the
frequencies in the memory are deleted.
Adjust [SETTINGS] mode settings
While listening to the radio...
1
Press the volume knob to enter
[FUNCTION]
mode.
2
Turn the volume knob to select
[SETTINGS]
, then press to enter.
3
Turn the volume knob to make a
selection, then press to confirm.
See table below for selection.
4
Hold
to finish the procedure.
Item
Selectable setting (Preset: *)
SEEK MODE
Selects the tuning mode for
4
/
¢
buttons.
AUTO1 *:
Automatically search for a station. ;
AUTO2:
Search in the order of the stations in the preset memory. ;
MANUAL:
Manually search for a station.
AUTO MEMORY YES:
Automatically starts memorizing 6 stations with good reception. ;
NO *:
Cancels (automatic memorizing is
not activated). (Selectable only if
[NORMAL]
is selected for
[PRESET TYPE]
.) (page 9)
MONO SET
ON:
Improves the FM reception (but the stereo effect may be lost). ;
OFF *:
Cancels (stereo effect resumes).
B64-4803-10̲01̲M̲English.indd 10
B64-4803-10̲01̲M̲English.indd 10
11/01/06 15:11
11/01/06 15:11
