English
|
65
Audio file source
?
Cannot play an Audio file.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
?
The sound skips when an Audio file is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
✔
The recording condition is bad.
☞
Record the media again or use another media.
?
The Audio file track time isn’t displayed correctly.
✔
---
☞
There are times when it isn’t displayed
correctly according to the Audio file recording
conditions.
HD Radio source
?
No sound can be heard, or the volume is low.
✔
The preset broadcast station is not transmitting
in the mode that was set with <Receive mode
Setting> (page 49).
☞
Please set <Receive mode Setting> to "Auto".
✔
In digital AM broadcasting, receive mode switches
between stereo and monaural too often.
☞
Receiving condition is bad or unstable.
Stereo is chosen when receiving condition is
good, and it switches to monaural when the
condition becomes bad.
✔
HD Radio tuner is connected to KCA-S210A or
other units.
☞
Connect the HD Radio tuner directly to this
unit.
USB device source
?
The USB device is not detected.
✔
The USB connector is disconnected.
☞
Connect the connector of the USB device
properly.
?
The USB device does not play its audio files.
✔
The USB connector is disconnected.
☞
Connect the connector of the USB device
properly.
The messages shown below display your
systems condition.
Eject:
No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.
➪
Load the disc magazine properly.
No CD in the unit.
➪
Insert the CD.
No Disc:
No disc has been loaded in the disc
magazine.
➪
Load a disc into the disc magazine.
TOC Error:
No disc has been loaded in the disc
magazine.
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪
Clean the CD and load it correctly.
Read Error:
• The number of files or folders which are
stored in the connected USB device is
above the limitation.
• The file system of the connected USB
device is broken.
➪
Copy the files and folders for the USB
device again referring to http://www.
kenwood.com/usb/. If the error
message is still displayed, initialize the
USB device or use other USB devices.
Error 05:
The CD is upside-down.
➪
Load the CD correctly.
Blank Disc:
Nothing has been recorded on the MD.
No Track:
No tracks are recorded on the MD,
although it has a title.
No Panel:
The faceplate of the slave unit being
connected to this unit has been removed.
➪
Replace it.
Error 77:
The unit is malfunctioning for some reason.
➪
Press the reset button on the unit. If
the "Error 77" code does not disappear,
consult your nearest service center.
Mecha Error:
Something is wrong with the disc
magazine. Or the unit is malfunctioning for
some reason.
➪
Check the disc magazine. And then
press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.
B64-3382-00̲01̲K̲English.Indd 65
B64-3382-00̲01̲K̲English.Indd 65
06.2.16 10:09:27 AM
06.2.16 10:09:27 AM
