English
|
9
Adjustment Item
Display
Range
Front High Pass
Filter *
2
"HPF"
Through/80/100/120/150
/180 Hz
Rear High Pass
Filter *
2
"HPR"
Through/80/100/120/150
/180 Hz
Low Pass Filter*
1
*
2
"LPF"
60/80/120/Through Hz
Subwoofer Phase*
1
*
2
"PHAS"
Reverse (180°) / Normal (0°)
Volume offset
"V-OFF"
–8 — ±0
Loudness
"LOUD"
ON/OFF
• Volume offset: Each source’s volume can be set as a
difference from the basic volume.
• Loudness: Compensating for low and high tones
during low volume.
• *
1
You can control this item when <Subwoofer
Output> (page 9) is set to "SW ON".
• *
2
Function of the KDC-MP6029
5
Exit Audio Setup mode
Press [VOL] knob for at least 1 second.
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time the knob is turned, the setting
switches as shown below.
Speaker type
Display
OFF
"SP OFF"
For 5 & 4 in. speaker
"SP 5/4"
For 6 & 6x9 in. speaker
"SP 6*9/6"
For the OEM speaker
"SP OEM"
4
Exit Speaker Setting mode
Press the [VOL] knob.
Function of the KDC-MP6029
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Hold down on [AM] of the Control knob for at
least 1 second.
Each time the button is pressed, Subwoofer
output switches ON and OFF.
When it’s ON, "SW ON" is displayed.
B64-2950-00̲English.indd 9
B64-2950-00̲English.indd 9
04.11.9 0:52:53 PM
04.11.9 0:52:53 PM
