6
|
KDC-MP5539U/KDC-MP5039U/KDC-MP4039
General Operation
Audio Control
You can adjust following Audio Control items;
Adjustment Item
Display
Range
Rear volume*
“R-VOLUME”
0 — 35
Subwoofer level
“SUB-W L”
–15 — +15
Bass Boost**
“B.BOOST-L”
“L1”/”L2”/“OFF” (The
indicator turns on according to
the setting.)
System Q
“NATURAL”/
“USER”/“ROCK”/
“POPS”/“EASY”/
“TOP40”/“JAZZ”
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz
(The indicator turns on
according to the setting.)
Bass level
“BASS L”
–8 — +8
Middle level
“MID L”
–8 — +8
Treble level
“TRE L”
–8 — +8
Balance
“BALANCE”
Left 15 — Right 15
Fader
“FADER”
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
*Function of KDC-MP5539U/MP5039U.
**Function of KDC-MP4039.
⁄
• “USER”: The customized Bass, Middle, and Treble levels
are effective. On the KDC-MP5539U/5039U, this item can
be selected at any time. On the KDC-MP4039, this item is
displayed only when the tone quality has been adjusted.
On the KDC-MP4039, this item disappears when another
setting is selected.
• You can set Bass, Middle, and Treble for each source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the Control knob.
3
Select the Audio item to adjust
Press the Control knob.
4
Adjust the Audio item
Turn the Control knob.
5
Exit Audio Control mode
Press any button.
Press a button other than the Control knob or
0
button.
Audio Setup
You can set Sound system , such as follows;
Adjustment Item
Display
Range
Front High Pass Filter*
“HPF F”
Through/80/100/120/ 150/180
Hz
Rear High Pass Filter*
“HPF R”
Through/80/100/120/ 150/180
Hz
Low Pass Filter
“LPF SW”
60*1/80/120/160*2/Through Hz
Subwoofer Phase*
“PHASE”
Reverse (180°)/ Normal (0°)
Volume offset
“V-OFFSET”
–8 — ±0 (AUX: -8— +8)
Loudness*
“LOUDNESS” OFF/ON
Dual Zone System*
“2ZONE”
OFF/ON
*Function of KDC-MP5539U/MP5039U.
*1KDC-MP5539U/MP5039U only. *2KDC-MP4039 only.
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “ZONE2” of <Menu
System> (page 10).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 6).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the Control knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the Control knob.
4
Adjust the Audio setup item
Turn the Control knob.
5
Exit Audio Setup mode
Press the Control knob for at least 1 second.
B64-3956-00̲English̲M̲r1.indd 6
B64-3956-00̲English̲M̲r1.indd 6
07.11.9 4:44:28 PM
07.11.9 4:44:28 PM
