11
KDC-MP4036U/MP435U/X491/W4537UA/W4537UAY
/W4537UG/W4537UGY/W4737U/W4737UY
[5]
key
Key pressed briefl y: Number of CD EJECT times is
displayed.
Press and hold: To clear CD EJECT times (Press and hold
for 2 seconds while the CD EJECT time is displayed.)
(Display) EJCxxxxx
MAX 65535 (times)
[6]
key
[FM]
key
Key pressed briefl y: ROM correction version is displayed.
When E2PROM is not installed: ERR_
When not written in: R – – – – _ _ _
(Display) R1234 _ _ _ When data not matching: R
∗∗∗∗_ _ _
[
]
key
Key pressed briefl y: AUDIO data initialization
(Display) AUD_INIT
[
]
key
Key pressed briefl y: Forced Power OFF data displayed.
Press and hold: To clear the forced power OFF information.
(Press and hold for 2 seconds while the forced power OFF
data is displayed.)
(Display) POFF _ – – – (No Forced Power OFF)
SEC
(Forced Power OFF because of
missing Security Code)
PNL
(Forced Power OFF because
of system µ-com and panel
communication error)
[AUD]
key
Key pressed briefl y: iPod authentication IC installation status
display (iPod 2Wire supporting model)
(Display) iPOD_ OK_ (Installation status OK)
NG
(Installation
status
NG)
[
]
key
Key pressed briefl y: CD information display mode ON
∗
Please refer to the next table.
●
CD information display mode
I2C communication condition display
(Display) I2C_OK_ _
NG
CD mechanism error log display [switched by [
] / [
] keys]
(Display) MCERR1: xx
↔
MCERR2: xx
↔
MCERR3: xx
↔
MCERR1: xx
↔
(“– –” or an error code is displayed for “xx”.)
[AM]
key
↑
CD loading error log display
[switched by [
] / [
] keys]
(Display) LDERR1: xx
↔
LDERR2: xx
↔
LDERR1: xx
↔
MAX 99 (times)
(Number of times is displayed for “xx”.)
CD ejection error log display
[switched by [
] / [
] keys]
(Display) EJERR1: xx
↔
EJERR2: xx
↔
EJERR3: xx
↔
EJERR4: xx
↔
EJERR1: xx
↔
MAX 99 (times)
(Number of times is displayed for “xx”.)
↓
[FM]
key
CD time code error count data display (missing counts)
[switched by [
] / [
] keys]
(Display) CNT_LOSE
↔
CDDA_ _xx
↔
CDROM_xx
↔
CNT_LOSE
↔
MAX 99 (times)
(Number of times is displayed for “xx”.)
CD time code error count data display (count not updated)
[switched by [
] / [
] keys]
(Display) CNT_STAY
↔
CDDA_ _xx
↔
CDROM_xx
↔
CNT_STAY
↔
MAX 99 (times)
(Number of times is displayed for “xx”.)
[
]
key
Key pressed briefl y: CD information display mode OFF
Press and hold: To clear entire CD information (Press and
hold for 2 seconds)
●
Initializing AUDIO-related setting value
Press the [
] key briefl y in the STANDBY source and
reset the AUDIO setting value to the test mode default
value.
●
Fluorescent tube short-checking
Change the process in the following order by pressing
[ATT] key briefl y while in STANDBY source.
1. All lights off.
2.
Every 125msec, light the odd and even number terminals
of the grid with the largest numbers.
3. Lights only odd number terminals.
4. Lights only even number terminals.
5. All lights on.
∗
After the step 5 above, return to the step 1 and repeat
thereafter.
●
Other
• W h e n Po w e r O N , d o n o t d i s p l a y “ C O D E _ N G ” ,
“CODE_OFF”, and “CODE_ON”.
• When the source is STANDBY, press [AUTO] or [TI]
keys briefly to switch key illumination between GREEN
and RED (GREEN
↔
RED). (in the model with ILLUMI
switching function)
• When the source is STANDBY, press and hold the [AUTO]
or [TI] keys for 1 second to switch the PREOUT between
Rear and Sub Woofer (Rear
↔
Sub Woofer). (1PREOUT
& 2PREOUT model)
• When started in the test mode, duration of prohibiting
LINE MUTE shall be changed from 10 seconds to 1
second.
• When in the test mode, do not write security code by
security jig.
TEST MODE
