Kenwood KDC-MP4026V, Инструкция по эксплуатации

Страница: 12 / 32

12
|
English
General features
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or a CD of the CD
Changer.
1
Receive/play the station/disc you want to
attach a title to
• A title can't be attached to MD or MP3/WMA media.
• You cannot use the Disc Naming for the built-in CD
player.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Name set mode
Press the [FM] or [AM] button.
Select the "NAME SET" display.
4
Enter Name set mode
Press the [
4
] or [
¢
] button for at least 2
seconds.
5
Move the cursor to the enter character
position
Press the [
4
] or [
¢
] button.
6
Select the characters
Press the [FM] or [AM] button.
• Characters can be entered by using a remote with a
numbers buttons.
Example: If "DANCE" is entered.
Character Button Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
7
Repeat steps 5 through 6 and enter the name.
8
Exit Menu mode
Press the [MENU] button.
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• The title of station/CD can be changed by the same
operation used to name it.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach
it.
• The faceplate is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the faceplate in its special storage case while
detached.
• Do not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.
Reattaching the Faceplate
1
Align the projections on the unit with the
grooves on the faceplate.
Projections
Grooves
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
B64-2687-00̲U.S̲r3.5.Indd 12 03.11.28, 9:29:47 AM