![Kenwood KDC-MP225 Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/kenwood/kdc-mp225/kdc-mp225_service-manual_1955783004.webp)
4
KDC-MP225,MP4026/G
KDC-W4527/G/GY/Y,W427Y
●
SWITCH UNIT (X16-2640-xx/2642-xx/2652-xx)
Ref. No.
Application / Function
Operation / Condition / Compatibility
IC1
LCD driver
Drive for LCD unit
IC2
Remote control IC
Receiving for the remote control unit
Q1
KEY scan detector
key scan start at base gose “L”.
Q2
key illumination SW
Lights up for RED key illumination when base voltage level goes “H”
Q3
key illumination SW
Lights up for GREEN key illumination when base voltage level goes “H”
●
ELECTRIC UNIT (X25-9980-xx/9982-xx/X34-3172-70)
Ref. No.
Application / Function
Operation / Condition / Compatibility
IC1
System microcomputer
Control for TUNER unit, CD mechanism, volume & tone, LCD driver and external CD changer unit
IC2
Electronic volume & N.C.MPX
Control for source selector, volume & tone, and FM multiplex detector.
Power supply for the units (Bu5V, Audio8V, FM+B, AM+B, P-con and ANT-con)
IC3
Power supply IC
IC4
Audio power amp IC
Amplifier for audio signal to derive for 4channel speakers (50W maximum for each channel)
IC6
Muting control IC
Control for timing for mute
IC7
RDS decoder
Decode for RDS signal
IC8
Reset IC
When detection voltage goes below 3.5V or less Reset IC output change to “L” signal
IC9
Switching regulator
Power supply for CD mecanism unit
Q1
Serge detection
When backup voltage become more than 24V output is “L” (momentary power down) /
When backup voltage become less than 24V output is “H”
Q2
Backup detection
When BU voltage supplied output is “L” /
When BU voltage not supplied or momentary power down is detected output is “H”
Q3
ACC detection
When ACC voltage supplied output is “L”
Q4
SW 5V
When base voltage is “L” Q4 is ON
Q21,24
AVR
Servo regulator
Q22
SW
Servo SW
Q23
IC control
Power supply IC controller
Q41
SW
Switching regulator control SW
Q101
Buffer amp
Composite signal buffer
Q151
DSI driver
When base voltage level is “L” DSI LED is light up / When base voltage level is “H” DSI LED
turns off / When panel assy is pull off, cut off the supply to panel 5V AVR.
Q201
Buffer amp
Noise buffer amp
COMPONENTS DESCRIPTION
SW1
OUT
1.5~3.0V
Audio ON
3.5~5.0V
Audio P-con ON
7.0V~
Audio P-con, P-ant ON
SW2
OUT
2.0~3.0V
Illumination, FM ON
4.0V~
Illumination, AM ON