14
KDC-MP208/MP238/MP238CR/MP239
KDC-MP3039/MP339/MP339S/MP439
■
Clearing DC offset error detection data (E2PROM data clearing)
Procedure
Note
While pressing and holding [3] key and [6] key, reset-start.
Entering DC offset error display mode.
Procedure
Display
Description
Press and hold the [3] and
[6] keys, and reset-start
D
C
E
R
R
When DC offset error is detected (when either one of capacitors is
leaking, or an improper connection or another error is detected)
D
C
O
K
When DC offset error is not detected (when none of capacitors leak,
no improper connection or other error is detected)
1
D
C
1
E
R
R
When improper connection or other DC offset errors are detected.
D
C
1
O
K
When improper connection or other DC offset errors are not detected.
■
1
D
C
1
O
K
When detecting improper connection or other DC offset errors, clears
detection data. (Clear E2PROM)
2
D
C
2
4
When detecting capacitor leak, provides information on the number
of capacitor leaks. (0~4)
■
2
D
C
2
0
When detecting capacitor leak, clears the number of capacitor leaks.
(Clear E2PROM)
This mode is cancelled by resetting. (The last screen will not be retained.)
■
FM/AM channel space switching
Procedure
Note
While Power OFF, press and hold [1] key and [5] key,
and press [SRC] key to Power ON
FM200kHz/AM10kHz
↔
FM50kHz/AM9kHz (Except KDC-MP238CR)
FM50kHz/AM10kHz
↔
FM200kHz/AM10kHz (KDC-MP238CR only)
■
Security (KDC-MP238/MP439 only)
• Forced Power ON mode
Procedure
Note
While pressing and holding [B.BOOST] key and [4] key, reset-start.
While “– – – –” is displayed, power can be turned ON for only 30
minutes. After 30 minutes, can only be recovered by resetting.
• Method of clearing the programmable security code (KDC MP238 only)
Procedure
Display
Description
Press [
] key for 3 seconds or
longerwhile pressing [AUTO] key
C
O
D
E : –
–
–
–
Carry out the procedure while “– – – –” is being displayed.
C
O
D
E :
“– – – –” disappears.
Press the remote control [5] key 2 times,
display “K”, and press [
] key.
C
O
D
E : K
Press the remote control [2] key 3 times,
display “C”, and press [
] key.
C
O
D
E : K
C
Press the remote control [2] key 1 time,
display “A”, and press [
] key.
C
O
D
E : K
C
A
Press the remote control [7] key 2 times,
display “R”, and press [
] key.
C
O
D
E : K
C
A
R
A
P
P
R
O
V
E
D
Security cancelled. (If wrong character is input, code
request mode is displayed.)
TEST MODE
