Kenwood KDC-MP172U, Инструкция по эксплуатации

Страница: 16 / 56

16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Do the required wiring.
( 17)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1 Detach the faceplate.
2 Fit the catch pin on the extraction keys into the holes on both sides of the trim
plate, then pull it out.
3 Insert the extraction keys deeply into the slots on each side, then follow the arrows
as shown on the illustration.
Installing the unit (in-dash mounting)
When installing without the mounting sleeve
1 Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle mounting bracket
and secure the unit with screws (supplied).
Use only the specified screws. Using wrong screws might damage the unit.
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
Part list for installation
(A) Faceplate (C) Mounting sleeve (B) Trim plate
(D) Wiring harness (E) Extraction key
INSTALLATION/CONNECTION
(F) Screws
ENGLISH
JS_KWD_KDC_MP172U_KN_EN_6.indd 16 JS_KWD_KDC_MP172U_KN_EN_6.indd 16 5/15/2017 8:32:06 AM 5/15/2017 8:32:06 AM