4
|
KDC-DAB43U/ KDC-DAB4557U
English
|
5
1. SAFETY
1.1 Safety precaution
#
WARNING
Do not operate any function that takes your
attention away from safe driving.
#
CAUTION
Volume setting:
• Adjust the volume so that you can hear sounds
outside the car to prevent accident.
• Lower the volume before playing digital sources
to avoid damaging the speakers by the sudden
increase of the output level.
General:
• Avoid using the USB device or iPod/iPhone if it
might hinder driving safety.
• Make sure all important data has been backed
up. We shall bear no responsibility for any loss of
recorded data.
• Never put or leave any metallic objects (such as
coins or metal tools) inside the unit, to prevent a
short circuit.
• If a disc error occurs due to condensation on the
laser lens, eject the disc and wait for the moisture to
evaporate.
1.2 Important information
Maintenance
•
Cleaning the unit:
Wipe off the dirt on the panel
with a dry silicon or soft cloth.
•
Cleaning the connector:
Detach the faceplate
and clean the connector with a cotton swab gently,
being careful not to damage the connector.
Condensation
When the car is air-conditioned, moisture may collect
on the laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the moisture
to evaporate.
How to reset your unit
If this unit fails to operate properly, press the reset
button. The unit returns to the factory settings when
the reset button is pressed.
2
3
1
Notes
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they can
work with your model and in your area.
• Characters that conform to ISO 8859-5 or ISO 8859-
1 can be displayed. Refer to “
” of
Changing the initial settings> (page 9)
.
• The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may differ
from what appears on the display on the actual
equipment, and some of the images on the display
may be inapplicable.
1.3 Regulatory Compliance
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-
0022, Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled
bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should
be recycled at a facility capable of handling these items and
their waste by products.
Contact your local authority for details in locating a recycle
facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our health
and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates
that this battery contains lead.
The marking of products using lasers
The label is attached to the chassis/case and says that the
component uses laser beams that have been classified as
Class 1. It means that the unit is utilizing laser beams that are
of a weaker class. There is no danger of hazardous radiation
outside the unit.
Содержание KDC-DAB43U
Страница 15: ......
