Kenwood KDC-D301 Скачать руководство пользователя страница 5

— 5 —

Storing CDs

• Do not store CDs in areas exposed to

direct sunlight (such as a car seat or the
dashboard) or other hot places. A CD-R or
CD-RW is more susceptible than a music
CD to damage from high temperatures and
humidity, and in some cases, may become
unusable if left in the car for long periods of
time.

• Remove CDs from the unit when not

listening to them for a while, and put them
back in their cases. Do not pile up CDs that
are removed from their cases or prop them
against something.

Cleaning CDs

If a CD has gotten dirty, wipe it off gently
using a commercially available cleaning cloth
or a soft cotton cloth, starting from the
center of the disc and moving outward. Do
not clean CDs with conventional record
cleaners, anti-static formulas, or chemicals
such as paint thinner or benzene.

Do Not Load CD Accessories 

Do not use commercially available CD
accessories that can be loaded into the CD
slot, such as stabilizers, protective sheets, or
CD cleaning discs, since they can cause the
unit to malfunction.

Checking New CDs for Burrs

When playing a new CD for the first time,
check that there are not any burrs stuck to
the perimeter of the disc or in the central
hole. CDs with burrs stuck on them may not
load properly or may skip while playing.
Remove burrs using a ballpoint pen or a
similar utensil.

Removing the CD

Only remove the CD from the machine in a
horizontal direction, holding it flat. You may
damage the surface of the CD if you try
pulling it down as it ejects.

Do Not Use Special Shape CDs

• Be sure to use round shape CDs only for

this unit and do not use any special shape
CDs. Use of special shape CDs may cause
the unit to malfunction.

• Be sure to use CDs with disc mark

only for this unit.

•CD-Rs and CD-RWs which have not

undergone finalization processing cannot
be played. (For more information on
finalization processing, refer to the manual
for your CD-R/CD-RW writing software or
CD-R/CD-RW recorder.) Additionally,
depending on the recording status, it may
prove impossible to play certain CDs
recorded on CD-R or CD-RW.

Do Not Use CDs with Sticker on the
Labeled Side

Do not use the CD with the label sticker
stuck on it.
Using such a CD may cause the CD to be
deformed and the sticker to peel off,
resulting in malfunction of the unit.

Burrs

Burrs

Содержание KDC-D301

















Отзывы: