Kenwood KDC-BT948HD, Инструкция по эксплуатации

Страница: 7 / 76

English |
7
Before Using
Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1
Press the [VOL] knob to quit the demonstration
mode when the messages “To cancel Demo
press the volume knob” are displayed (approx. 15
seconds).
2
Turn the [VOL] knob to select “YES” and press the
[VOL] knob.
⁄
• Demonstration mode can also be cancelled in “DEMO
Mode” of Menu List mode. Refer to <Demonstration mode
Setting> (page 38) .
Common Operation
Power and source select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
• SRC Select mode 1: Pressing the [SRC] button
each time switches between sources.
HD Radio (“HD RADIO”)
➜
USB (“USB”) or iPod
(“iPod”)
➜
Pandora (“Pandora”)
➜
CD (“CD”)
➜
Auxiliary input (“AUX”)
➜
Standby (“STANDBY”)
➜
HD Radio...
• SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The SRC Select mode can be set in “SRC Select” of <Initial
Settings> (page 38) .
• Auxiliary input source is initially set to “OFF”. Set “Built in
AUX” described in <Initial Settings> (page 38) to “ON”.
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
Volume
Turning the [VOL] knob adjusts the sound
volume.
Menu List Operation
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Function items vary from source to source. For a list
of the function items. Refer to
<Menu List> (page 62) .
2
Enter Menu List mode
Press the [MENU] button.
3
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
✍ Press the [MENU] button to return to the
previous item.
Operation example:
Music
PlayLists
My Best 25
…
Artists
Albums
…
Play Mode
…
[VOL]
[MENU]
[VOL]
[MENU]
1 1
2
2
3
4
3
1
4
2
3
1 sec.
In this manual, the above selection is indicated as
Select “Music” > “Playlists” > “My Best 25”.
4
Make a setting
• When the “
PUSH
” icon is displayed (at the
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the “
PUSH
” icon is not displayed
Press the [
4
] or [
¢
] button to select a
setting value.
5
Exit Menu List mode
Press the [MENU] button for at least 1 second to
return to the first hierarchy. Press the [MENU]
button in the first hierarchy to exit the Menu
List mode.
⁄
•
You cannot set the item with the “ ” icon displayed.
General operation