18
KDC-BT7539U/BT8041U
/BT8141UY/BT838U
[
]
key
Key pressed brie
fl
y: AUDIO data initialization
(Display) AUD_INIT
[
]
key
Key pressed brie
fl
y: Forced Power OFF data displayed.
Press and hold: To clear the forced power OFF infor-
mation. (Press and hold for 2 seconds while the forced
power OFF data is displayed.)
(Display) POFF_ - - - (No Forced Power OFF)
SEC
(
Forced Power OFF because of
missing Security Code)
PNL
(
Forced Power OFF because of
system
μ
-com and panel commu-
nication error)
[AUD]
key
Key pressed brie
fl
y: iPod authentication IC installation
status display
(Display) iPod_ OK_ (Installation status OK)
NG (Installation status NG)
[FNC]
key
Key pressed brie
fl
y: Multi-function display
Press and hold: Version & Service information display
mode ON
Refer to the Table 1.
[1]~[6]
Key
(Remote
controller)
Key pressed brie
fl
y: Version & Service information display
mode ON
Refer to the Table 1.
[ ]
key
Key pressed brie
fl
y: CD information display mode ON
Refer to the Table 2.
Table 1 - Version & Service information display mode
[AM]
key
↑
↓
[FM]
key
[1]
key
(Remote
controller)
Key pressed brie
fl
y: Version is displayed (Switching)
(Display) C0715WK__SYS1.23
(Display) STYPE: ××_PAN1.11
(Display) PTYPE: ×__
∗
1 STYPE indicates system
μ
-com destination, and
PTYPE indicates panel
μ
-com destination, and
show real-time condition of the destination termi-
nal
↓↑
Use the remote controller [1] key or the [
] /
[
] keys to switch.
(Display) BT_VER : HW×××_SW×××
(BT module H/W & S/W Version)
(Display) ADDR : ××××××××××××
(BT module Address)
(Display) PIN : ××××××××
(BT module PIN Code)
[2]
key
(Remote
controller)
Key pressed brie
fl
y: Serial No. is displayed (8 digits)
(Display) SNo_××××××××
[3]
key
(Remote
controller)
Key pressed brie
fl
y: Power ON time is displayed.
(Display) PonTim_0H××_ (00~50 is displayed for “xx”.
When less than 1 hour,
display by increment of 10
minutes.)
×××××
(00001-10922 is displayed
for “xxxxxx”.)
MAX 10922 (hours)
[AM]
key
↑
↓
[FM]
key
[4]
key
(Remote
controller)
Key pressed brie
fl
y: CD operation time is displayed.
(Display) CDTim_0H××_ (00~50 is displayed for “xx”.
When less than 1 hour,
display by increment of 10
minutes.)
×××××
(00001-10922 is displayed
for “xxxxxx”.)
MAX 10922 (hours)
[5]
key
(Remote
controller)
Key pressed brie
fl
y: Number of CD EJECT times is
displayed.
(Display) EjeCnt_×××××
MAX 65535 (times)
[ ] key
Key pressed brie
fl
y: Invalid
Press and hold: To clear the service information that
is being displayed. (Press and hold for 2 seconds
while each service information is displayed.)
[FNC] key Key pressed brie
fl
y: Version & Service information
display mode OFF
Table 2 - CD information display mode
[AM]
key
↑
↓
[FM]
key
I2C communication condition and CD mechanism error log
display
(Display) I2C_
{{
____________
(Display) ERR_1-
UU
, 2-
U
, 3-
UU
∗
“OK” or “NG” is displayed for “
{{
”. / “—“ or the error
code is displayed for “
U
/
U
”.
CD loading error log display
(Display) Load_Error____
(Display) __(1) xx__ (2) xx
(Number of times is displayed for “xx”.) MAX 99 (times)
CD ejection error log display
(Display) Eject_Error___
(Display) __(1) xx__ (2) xx
(Display) __(3) xx__ (4) xx
(Number of times is displayed for “xx”.) MAX 99 (times)
CD time code error count data display (missing counts)
(Display) Count_Lose
(Display) __CDDA_: xx
(Display) __CDROM: xx
(Number of times is displayed for “xx”.) MAX 99 (times)
CD time code error count data display (count not updated)
(Display) Count_Stay
(Display) __CDDA_: xx
(Display) __CDROM: xx
(Number of times is displayed for “xx”.) MAX 99 (times)
[ ]
key
Key pressed brie
fl
y: CD information display mode OFF
Press and hold: To clear entire CD information (Press and
hold for 2 seconds)
●
Initializing AUDIO-related setting value
Press the [ ] key brie
fl
y in the STANDBY source to reset
the AUDIO setting value to the test mode default value.
TEST MODE
