Kenwood KDC-BT752HD, Инструкция по эксплуатации

Страница: 23 / 108

English
23
Continued to next page
displayed.
■ ■
When “(device name)” is displayed, select
"[NEW DEVICE]" and press the control
knob.
■ ■
When “DEVICE FULL” is displayed, delete a
Bluetooth device and retry.
1. Turn the volume knob to select the
Bluetooth device, then press and hold
to confirm.
2. Turn the volume knob to select “YES”,
then press to confirm.
2
Turn the volume knob to select a
Bluetooth device name, press and hold
to confirm.
“BT TEST MODE” is displayed.
3
“CONFIRM DVC” is displayed.
If “PAIRING OK” is displayed, proceed to
step 6.
If “PIN CODE” is displayed, proceed to steps
4.
If “*** NG” is displayed, press the volume
knob. Proceed to steps 3.
4
Input the PIN code
■ ■
Turn the volume knob to select the
number.
■ ■
To move to the next digit, press
¢
.
■ ■
To delete the last digit, press
4
.
5
Press the volume knob to transmit the
PIN code.
6
The connection result, “OK” or “NG”, is
displayed.
■ ■
“PAIRING”: Registration to this unit
■ ■
“HF CONNECT”: Hands-free phoning
■ ■
“AUD CNT”: Audio playback
■ ■
“PB DL”: Phone Book downloading
7
Press to exit pairing mode.
■ ■
Data (Phone Book, etc.) of the cell-phone
checked for connection does not remain in
this unit.
Bluetooth Setup
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select
[SETTINGS] , then press to enter.
3
Turn the volume knob to make a
selection, then press to confirm.
■ ■
See table below for selection.
■ ■
Repeat step 3 until the desired item is
selected/activated.
■ ■
Press to return to the previous item.
4
Hold to finish the procedure.
■ ■
To cancel the Bluetooth mode, press .
Item Selectable setting (Preset: *)
PAIRING
DEVICE SEARCH Registers a Bluetooth device (pairing). (For details, see page 22.)
PHONE SELECT
Selects a cell-phone connection. (For details, see page 22.)
AUDIO SELECT
Selects a Bluetooth audio player connection. (For details, see page 22.)
S-DVC SELECT
(For details, see page 22.)
DEVICE DELETE
Cancel registration of the Bluetooth device.
1. Turn the volume knob to select the Bluetooth device, then press to confirm.
2. Turn the volume knob to select “YES”, then press to confirm.
DETAILED SET
PIN CODE EDIT
Specify the PIN code required when registering this unit using the Bluetooth device. By default, “0000” is
specified.
1. Turn the volume knob to select the number.
■ ■
To move to the next digit, press
¢
.
■ ■
To delete the last digit, press
4
.
2. Press the volume knob to register a PIN code
AUTO ANSWER OFF:
Does not answer the phone call automatically. ;
0:
Automatically answers the phone call at once. ;
1 – 8 * –99:
Automatically answers the phone call after lapse of 1 – 99 seconds.
B64-4935-00_01_K.indb 23 11/12/21 9:39