ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
SYSTEM
KEY BEEP
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
PANDORA SRC
ON
: Enables PANDORA 1/PANDORA 2/PANDORA in source selection. ;
OFF
: Disables.
( 12)
IHEART SRC
ON
: Enables IHEARTRADIO 1/IHEARTRADIO 2/IHEARTRADIO in source
selection. ;
OFF
: Disables.
( 13)
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
( 11)
CD READ
1
: Automatically distinguishes between audio file disc and music CD. ;
2
: Forces to play as a music CD. No sound can be heard if an audio file disc
is played.
F/W UPDATE
UPDATE SYSTEM/UPDATE HD
(for
/
)
F/W UPDATE
xxxx/
F/W UPDATE
Vxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
FACTORY RESET
YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels.
CLOCK
CLOCK DISPLAY
(For
/
/
/
)
ON
: The clock time is shown on the display even when the unit is turned
off. ;
OFF
: Cancels.
ENGLISH
Select the display language for
[FUNCTION]
menu and music information
if applicable.
By default,
[ENGLISH]
is selected.
ESPANOL
Register the marine remote ID
(for
)
Applicable only when you connect Kenwood Marine Remote Control unit
(KCA-RC55MR, optional accessory) to this unit.
• For connection,
37, Wiring connection
.
• Refer also to the supplied instruction manual of the Kenwood Marine
Remote Control unit for more information.
Preparation:
Press
repeatedly to enter STANDBY, then press the volume knob
to enter
[FUNCTION].
1
Turn the volume knob to select an item, then press the knob.
[SYSTEM]
[REMOTE SETTING]
[REMOTE ID SET]
Remote control ID list is displayed.
•
[YES]
indicates that this ID is already registered.
•
[NO]
indicates that this ID is available.
2
Turn the volume knob to select an available ID
[REMOTE ID1]
/
[REMOTE ID2]
/
[REMOTE ID3]
, then press the knob
.
“REGISTERING” appears on the display window.
To register, on the Kenwood Marine Remote Control unit:
• Press
ENTER
to register as
[REMOTE ID1]
.
• Press
SRC
to register as
[REMOTE ID2]
.
• Press
DISP
to register as
[REMOTE ID3]
.
Once the ID is registered, “COMPLETED” appears.
To delete the registered ID
1
Turn the volume knob to select an item, then press the knob.
[SYSTEM]
[REMOTE SETTING]
[REMOTE ID DELETE]
2
Turn the volume knob to select the ID to delete [
ID1 DELETE]
/
[
ID2 DELETE]
/[
ID3 DELETE]
, then press the knob.
3
Turn the volume knob to select
[YES]
to delete the selected ID, and
select
[NO]
to cancel.
• To exit, press and hold
.
• To return to the previous setting item, press
.
GETTING STARTED
JS_KWD_KDC_X701_KN_EN_4.indd 5
JS_KWD_KDC_X701_KN_EN_4.indd 5
11/14/2016 8:41:38 AM
11/14/2016 8:41:38 AM
