Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
ENGLISH
27
REFERENCES
Change the display information
Each time you press
DISP
, the display information changes.
•
If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information
(eg. station name, playing time) appears.
Source name
Display information
STANDBY
Source name Clock (back to the beginning)
TUNER
Frequency Clock (back to the beginning)
(For FM Radio Broadcast Data System stations only)
Station name Radio text Radio text+ Title/Artist Frequency
Clock (back to the beginning)
CD or USB
(For CD-DA)
Disc name/Artist Track title/Artist Playing time Clock (back to the
beginning)
(For MP3/WMA/AAC/WAV/FLAC files)
Track title/Artist Album title/artist Folder name File name Playing
time Clock (back to the beginning)
iPod USB/
iPod BT or
ANDROID
When
[MODE OFF]
/
[BROWSE MODE]
is selected
( 8)
:
Track title/Artist Album title/Artist Playing time Clock (back to
the beginning)
PANDORA/
PANDORA BT
Station name Shared/Radio station Track title Artist Album title
Playing time Clock (back to the beginning)
IHEARTRADIO
Station name Track title/Artist Clock (back to the beginning)
BT AUDIO
Track title/Artist Album title/Artist Playing time
Clock (back to
the beginning)
AUX
Source name Clock (back to the beginning)
INSTALLATION/CONNECTION
Warning
•
The unit can only be used with a 12 V DC power supply, negative ground.
•
Disconnect the battery’s negative terminal before wiring and mounting.
•
Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire
(black) to prevent a short circuit.
•
Insulate unconnected wires with vinyl tape to prevent a short circuit.
•
Be sure to ground this unit to the car’s chassis again after installation.
Caution
•
For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.
•
Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during
and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.
•
Do not connect the
[
wires of speakers to the car chassis or Ground wire (black), or connect
them in parallel.
•
Mount the unit at an angle of less than 30º.
•
If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)
to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned
on and off by the ignition key.
•
Keep all cables away from heat dissipate metal parts.
•
After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are
working properly.
•
If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old
fuse with one that has the same rating.
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
[
terminal of the car
battery.
2
Connect the wires properly.
See Wiring connection.
( 29)
3
Install the unit to your car.
See Installing the unit (in-dash mounting).
( 28)
4
Connect the
[
terminal of the car battery.
5
Press
to turn on the power.
6
Detach the faceplate and reset the unit. ( 3)
JS_KWD_KDC_BT268U_KN_EN_2.indd 27
JS_KWD_KDC_BT268U_KN_EN_2.indd 27
14/10/2016 10:25:15 AM
14/10/2016 10:25:15 AM
