manualshive.com logo in svg

Kenwood KDC-8080R, Инструкция по эксплуатации

Поделиться
Скачать
Kenwood KDC-8080R Скачать руководство пользователя страница 14

“HPF Rear” : Adjust the frequency of the High-pass filter for rear

output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /

150Hz / 180Hz / 220Hz

You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter works except
during non-fading preout when switching to non-fading (KDC-
8080R only). The factory default settings for front output and rear
output are "through" .

NOTE

“HPF Front” : Adjust the  frequency of the High-pass filter for

front output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /

150Hz / 180Hz / 220Hz

You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter works except
during non-fading preout when switching to non-fading (KDC-
8080R only). The factory default settings for front output and rear
output are "through" .

NOTE

“NFpre Level” : Adjust the Non-fading output level.

Setting values: - 15  –  + 15

• This mode is available only when the non-fading output function

is set to on. (KDC-8080R only)

• Not available during the Dual zone system is on.

NOTE

“Fader” : Adjust the fader level.

Setting values: Front 15  –  Rear 15

“Balance” : Adjust the balance level.

Setting values: Left 15  –  Right 15

“Tre” : Adjust the treble level.

Setting values: - 8  –  + 8

“Tre Frq” : Adjust the centre frequency of the treble.

Setting values: 10.0 / 12.5 / 15.0 / 17.5 kHz

This mode is available only when the Sound coordinate system is
on. (page 36).

NOTE

“Bass EXT” : Switch the Bass Extend mode on/off.

Setting values: ON / OFF

(When the bass extend mode is set to on, low
frequency response is extended by 20%.)

This mode is available only when the Sound coordinate system is
on. (page 36)

NOTE

General features

— 14 —

English

Содержание KDC-8080R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды