5
ENGLISH |
RADIO
Search for a station
1
Press
L
SRC
to select TUNER.
2
Press
repeatedly (or press
*
AM–
/
#FM+
on RC-406) to select FM1/
FM2/ FM3/ MW/ LW/ SW1/ SW2.
3
Press
4
/
¢
to search for a station.
•
To store a station:
Press and hold one of the number buttons (
1
to
6
).
•
To select a stored station:
Press one of the number buttons (
1
to
6
)
Change the frequency steps
(for
KDC-U4556
/
KDC-U3556
)
You can change the frequency step of:
FM: 50 kHz to 200 kHz
MW: 9 kHz to 10 kHz
1
Press and hold
L
SRC
to turn off the power.
2
While pressing number buttons
1
and
5
, press
L
SRC
.
Release your fingers from the buttons after the display appears.
• To restore the initial setting, repeat the same procedure.
• When the frequency step is changed, the previously stored stations in the
memory are deleted.
Direct Access Tuning (using RC-406)
1
Press
*
AM–
/
#FM+
to select a band.
2
Press
DIRECT
to enter Direct Access Tuning.
“– – – • –” (for FM), “– – – –” (for MW/ LW/ SW1) or “– – – – –” (for SW2) appears on the
display.
3
Press the number buttons to enter a frequency.
4
Press
4
/
¢
(
+
) to search for a frequency.
• To cancel, press
.
• If no operation is done for 10 seconds after step
3
, Direct Access Tuning is
automatically canceled.
Other settings
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[SETTINGS]
, then press the knob.
3
Turn the volume knob to make a selection (see the table below and on page 6),
then press the knob.
4
Press and hold
to exit.
Default:
XX
LOCAL SEEK
ON
: Searches only stations with good reception. (For
KDC-U4556
/
KDC-U3556
: MW/
SW1/ SW2 stations only ; For
KDC-3757URM
/
KDC-3657UGM
: FM stations only.) ;
OFF
: Cancels.
SEEK MODE
Selects the tuning method for the
4
/
¢
buttons.
AUTO1
: Automatically searches for a station. ;
AUTO2
: Searches for a preset station. ;
MANUAL
: Manually search for a station.
AUTO
MEMORY
YES
: Automatically starts memorizing 6 stations with good reception. ;
NO
: Cancels.
(Selectable only if
[NORM]
is selected for
[PRESET
TYPE]
.)
(
➜
4)
MONO SET
Selectable only when the source is FM.
ON
: Improves the FM reception, but the stereo effect may be lost. ;
OFF
: Cancels.
EN_KDC-U4556[MWM0]f.indd 5
EN_KDC-U4556[MWM0]f.indd 5
7/25/12 5:21:55 PM
7/25/12 5:21:55 PM
