22
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
/
LEVEL4
/
LEVEL5
or
LV1
/
LV2
/
LV3
/
LV4
/
LV5
: Selects your preferred bass boost level. ;
OFF
: Cancels.
LOUDNESS
LEVEL1
/
LEVEL2
or
LV1
/
LV2
: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME OFFSET
–15
to
+6
(
0
): Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
(Not applicable for RADIO source and AUX source.)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
SPACE ENHANCE
(Not applicable for RADIO source.)
SMALL
/
MEDIUM
/
LARGE
or
SML
/
MED
/
LRG
: Virtually enhances the
sound space. ;
OFF
: Cancels.
SND REALIZER
LEVEL1
/
LEVEL2
/
LEVEL3
or
LV1
/
LV2
/
LV3
: Virtually makes the sound
more realistic. ;
OFF
: Cancels.
STAGE EQ
LOW
/
MIDDLE
/
HIGH
or
LOW
/
MID
/
HI
: Virtually adjust the sound
position heard from the speakers. ;
OFF
: Cancels.
DRIVE EQ
ON
: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ;
OFF
: Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected
( 6)
, 2-way
crossover or 3-way crossover setting items will be shown
( 23, 24)
.
By default, 2-way crossover type is selected.
X’OVER
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter
[FUNCTION]
.
(For
) Press
AUD
to enter
[AUDIO CONTROL]
directly.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
(or using the remote control)
1
Press
AUD
to enter
[AUDIO CONTROL]
.
2
Press
J
/
K
to select an item, then press
.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SUB-W LEVEL
LEVEL –50
to
LEVEL +10
(
LEVEL 0
): Adjusts the subwoofer
output level.
MANUAL EQ
The sound elements (frequency level, tone level, Q factor) are
preset into each selection.
62.5HZ
LEVEL
LEVEL –9
to
LEVEL +9
(
LEVEL 0
): Adjusts
the level to memorize for each source. (Before
making an adjustment, select the source you
want to adjust.)
BASS EXTEND ON
: Turns on the extended bass. ;
OFF
: Cancels.
100HZ
/
160HZ
/
250HZ
/
400HZ
/
630HZ
/
1KHZ
/
1.6KHZ
/
2.5KHZ
/
4KHZ
/
6.3KHZ
/
10KHZ
/
16KHZ
LEVEL –9
to
LEVEL +9
(
LEVEL 0
): Adjusts the level to
memorize for each source. (Before making an adjustment, select
the source you want to adjust.)
Q FACTOR
1.35
/
1.50
/
2.00
: Adjust the quality factor.
PRESET EQ
NATURAL
/
ROCK
/
POPS
/
EASY
/
TOP40
/
JAZZ
/
POWERFUL
/
USER
: Selects a preset equalizer suitable to the music genre.
(Select
[USER]
to use the settings made in
[MANUAL EQ]
.)
ENGLISH
JS_KWD_KDC_BT620U_MN_EN_1.indd 22
JS_KWD_KDC_BT620U_MN_EN_1.indd 22
15/5/2017 3:35:11 PM
15/5/2017 3:35:11 PM
