5
6
KDC-3016RG/303RG/3080RA/RG/RYA/RYG
MICROCOMPUTER'S TERMINAL DESCRIPTION
KDC-3016RG/303RG/3080RA/RG/RYA/RYG
NOTE
1. For arm ass’ies Nos.6 and 7 used in the CD mechanism
ass’y, use the combination of the following parts.
Ref.No.
Parts No.
Parts No.
6
D10-4306-04
D10-3083-44
7
D10-4305-04
D10-3084-44
2. The parts numbers of arm ass’ies Nos.6 and 7 shown in the
exploded view of CD mechanism ass’y are D40-4306-04
and D40-4305-04 respectively.
TEST MODE
1. To enter test mode
While holding the “FM” key and preset “6” key, reset the unit.
All indication segments are ON at the beginning of test mode.
2. To release test mode
Simply reset the unit.
(NOTE) The test mode is not canceled by ACC OFF, power
OFF, momentary power down or the panel detaching.
3. CD receiver test mode specification
Pressing the “Track up” key jumps between tracks in the
following order.
No.9
→
No.15
→
No.10
→
No.11
→
No.12
→
No.13
→
No.14
→
No.9 (Same as the beginning)
Pressing the “Track down” key jumps to the previous track to
the being played.
Pressing the preset “1” key jumps to No.28 track.
4. Audio adjustment
The volume is set to -10dB (which is shown as 30).
Loudness is OFF.
The BASS / TREBLE and BALANCE / FADER controls can
be set to the full boost / full cut and full front / full rear
respectively by pressing the “Track UP” / “Track DOWN” keys.
Sound coordination doesn't appear for the feed.
ADJUSTMENT
Pin
Function
I/O
Description
Processing Operation
54
N.C
O
Not used
55
N.C
O
Not used
56
SW5
O
SW 5V control
”Lo”: POWER ON mode
57
P ON
O
Microprocessor peripheral power supply control terminal
”Hi”: ACC ON or during CD Loading/Eject
58
TYPE2
I
Destination type input terminal 2
59
N.C
O
Not used
60
RESET
I
Reset input terminal
”Lo”: System reset
61
REMO
I
Data input from the remote control light sensor
62
R CLK
I
Clock input from RDS decoder
63
CH-REQC
I
Request input from changers
”Hi”: Request
64
SW1
I
Loading detection
”Lo”: CD chucking
65
KEY-REQ
I
Key request terminal
”Lo”: Request
66
SW2
I
12cm disc detection terminal
”Lo”: 12cm disc
67
VSS0
-
Ground connection terminal
connected to GND
68
VDD1
-
VDD connection terminal
69
X2
-
Main clock resonator connection terminal
70
X1
I
Main clock resonator connection terminal
71
IC(TEST)
-
Not used
connected to GND
72
XT2
-
Sub clock resonator connection terminal
N.C.
73
N.C
I
Sub clock resonator connection terminal
connected to BU5V lines
74
VDD0
-
VDD connection terminal
75
AVREF0
I
A/D converter reference voltage input
76
SMETER
I
S-meter input from the tuner pack
77
PHONE
I
PHONE detection input
1V or less: TEL MUTE,2.5V or greater: NAVI MUTE
78
NOISE
I
Noise detection input
79
TYPE0
I
Destination type input terminal 0
80
TYPE1
I
Destination type input terminal 1
