ENGLISH
13
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
DISPLAY SETTINGS
Default:
XX
DISPLAY
COLOR SELECT
(For
/
)
Select color for
ALL ZONE
,
ZONE 1
and
ZONE 2
separately.
1
Select a zone. (See the illustration on page 12.)
2
Select a color for the selected zone.
INITIAL COLOR
/
VARIABLE SCAN
/
CUSTOM R/G/B
/preset colors*
To make your own color, select
[CUSTOM R/G/B]
. The color you have
made will be stored in
[CUSTOM R/G/B]
.
1
Press the volume knob to enter the detailed color adjustment.
2
Press
S
/
T
to select the color (
R
/
G
/
B
) to adjust.
3
Turn the volume knob to adjust the level (
0
to
9
), then press the knob.
DIMMER
Dim the illumination.
ON
: Dimmer is turned on. ;
OFF
: Cancels.
DIMMER TIME
: Set the dimmer on and off time.
1
Turn the volume knob to adjust the
[ON]
time, then press the knob.
2
Turn the volume knob to adjust the
[OFF]
time, then press the knob.
(Default:
[ON]
:
18:00
;
[OFF]
:
6:00
)
BRIGHTNESS
1
Select a zone. (See the illustration on page 12.)
2
0
to
31
: Select your preferred brightness level for the selected zone.
TEXT SCROLL
AUTO
/
ONCE
: Select whether to scroll the display information
automatically, or scroll only once. ;
OFF
: Cancels.
*
Preset colors:
RED1
/
RED2
/
RED3
/
PURPLE1
/
PURPLE2
/
PURPLE3
/
PURPLE4
/
BLUE1
/
BLUE2
/
BLUE3
/
SKYBLUE1
/
SKYBLUE2
/
LIGHTBLUE
/
AQUA1
/
AQUA2
/
GREEN1
/
GREEN2
/
GREEN3
/
YELLOWGREEN1
/
YELLOWGREEN2
/
YELLOW
/
ORANGE1
/
ORANGE2
/
ORANGERED
Warning
•
The unit can only be used with a 12 V DC power supply, negative ground.
•
Disconnect the battery’s negative terminal before wiring and mounting.
•
Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire
(black) to prevent a short circuit.
•
To prevent a short circuit:
– Insulate unconnected wires with vinyl tape.
– Be sure to ground this unit to the car’s chassis again after installation.
– Secure the wires with cable clamps and wrap vinyl tape around the wires that come into
contact with metal parts to protect the wires.
Caution
•
For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.
•
Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during
and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.
•
Do not connect the
[
wires of speakers to the car chassis or Ground wire (black), or connect
them in parallel.
•
Mount the unit at an angle of less than 30º.
•
If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)
to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned
on and off by the ignition key.
•
Keep all cables away from heat dissipate metal parts.
•
After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are
working properly.
•
If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old
fuse with one that has the same rating.
INSTALLATION/CONNECTION
JS_KWD_KDC_220UI_ENE2N_EN_4.indd 13
JS_KWD_KDC_220UI_ENE2N_EN_4.indd 13
7/13/2017 11:05:22 AM
7/13/2017 11:05:22 AM
Содержание KDC-220UI
Страница 45: ...JS_KWD_KDC_220UI_ENE2N_RU indd 21 JS_KWD_KDC_220UI_ENE2N_RU indd 21 10 7 2017 2 52 39 PM 10 7 2017 2 52 39 PM ...
Страница 65: ...JS_KWD_KDC_220UI_ENE2N_UK indd 21 JS_KWD_KDC_220UI_ENE2N_UK indd 21 10 7 2017 2 50 37 PM 10 7 2017 2 50 37 PM ...
Страница 66: ...JS_KWD_KDC_220UI_ENE2N_UK indd 22 JS_KWD_KDC_220UI_ENE2N_UK indd 22 10 7 2017 2 50 37 PM 10 7 2017 2 50 37 PM ...
Страница 67: ...JS_KWD_KDC_220UI_ENE2N_UK indd 23 JS_KWD_KDC_220UI_ENE2N_UK indd 23 10 7 2017 2 50 37 PM 10 7 2017 2 50 37 PM ...
