Kenwood KDC-110UB, Инструкция по эксплуатации

Страница: 15 / 80

ENGLISH
11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
PRESET EQ DRIVE EQ / TOP40 / POWERFUL / ROCK / POPS / EASY / JAZZ / NATURAL /
USER : Selects a preset equalizer suitable to the music genre. (Select
[USER] to use the settings made in [EQ PRO] .)
[DRIVE EQ] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASS BOOST LEVEL1 / LEVEL2 / LEVEL3 or LV1 / LV2 / LV3 : Selects your preferred
bass boost level. ; OFF : Cancels.
LOUDNESS LEVEL1 / LEVEL2 or LV1 / LV2 : Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ;
OFF : Cancels.
SUBWOOFER SET
*
ON : Turns on the subwoofer output. ; OFF : Cancels.
LPF SUBWOOFER
*
THROUGH : All signals are sent to the subwoofer. ;
85HZ / 120HZ / 160HZ : Audio signals with frequencies lower than
85 Hz/120 Hz/160 Hz are sent to the subwoofer.
SUB-W PHASE
*
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than
[THROUGH] is
selected for [LPF SUBWOOFER] .)
FADER R15 to F15 ( 0 ): Adjusts the rear and front speaker output balance.
BALANCE L15 to R15 ( 0 ): Adjusts the left and right speaker output balance.
VOLUME OFFSET For AUX: –8 to +8 ( 0 ) ; For other sources: –8 to 0 : Preset the initial
volume level of each source. (Before adjustment, select the source you
want to adjust.)
SOUND RECNSTR
(Sound reconstruction)
ON : Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF : Cancels.
• [SUB-W LEVEL] / [SUBWOOFER SET] / [LPF SUBWOOFER] / [SUB-W PHASE] is
selectable only if [SWITCH PREOUT] is set to [SUBWOOFER] or [SUB-W] . ( 4)
• [SUB-W LEVEL] / [LPF SUBWOOFER] / [SUB-W PHASE] is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
* Except for
AUDIO SETTINGS
Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the dimmer.
• If you have set [DIMMER TIME] ( 12) , it will be canceled once you press
and hold this button.
Other settings
1
Press the volume knob to enter [FUNCTION] .
2
Turn the volume knob to select an item ( 12) , then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press .
DISPLAY SETTINGS
/ /
/ /
JS_KWD_KDC_210UI_ENE2N_EN_2.indd 11 JS_KWD_KDC_210UI_ENE2N_EN_2.indd 11 29-Jul-16 3:56:35 PM 29-Jul-16 3:56:35 PM