1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
Audio Control
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound setting
Display
Flat
"SQ-1"
Rock
"SQ-2"
Top 40
"SQ-3"
Pops
"SQ-4"
Jazz
"SQ-5"
Easy
"SQ-6"
• Each setting value is changed with the <Speaker setting> (page
7). First, select the speaker type with the Speaker setting.
• When the System Q setting is changed, the Bass, Middle, and
Treble set in audio control replace the System Q values.
System Q
— 7 —
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it’s ON, "LOUD" indicator is ON.
switch as shown below.
4
Adjust the Audio item
Press the [
4
] or [
¢
] button.
Adjustment Item
Display
Range
Bass level
"BAS"
–8 — +8
Middle level
"MID"
–8 — +8
Treble level
"TRE"
–8 — +8
Balance
"BL"
Left 15 — Right 15
Fader
"FD"
Rear 15 — Front 15
5
Exit Audio Control mode
Press the [AUD] button.
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "OFF" display.
2
Enter Speaker Setting mode
Press the [Q] button.
3
Select the Speaker type
Press the [
4
] or [
¢
] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
Display
OFF
"SP-F"
For the OEM speaker
"SP-O"
For 6 & 6x9 in. speaker
"SP-6"
For 5 & 4 in. speaker
"SP-5"
4
Exit Speaker Setting mode
Press the [Q] button.
Speaker Setting
KDC-4023_U.S 02.9.26 3:09 PM Page 7
