Kenwood KD 150, Инструкция по эксплуатации

Страница: 21 / 32

21
INSIDE OF OVEN
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water.
Suitable proprietary chemical cleaners may be used after first consulting with the manufac-
turers recommendations and testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity surfa-
ce.
NOTE:
The manufacturers of this appliance will accept no responsibility for damage cau-
sed by chemical or abrasive cleaning.
B C
REPLACING THE OVEN LIGHT
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
• Let the oven cavity and the heating elements to cool down.
• Switch off the electrical supply.
• Unscrew the protective cover “ C ” (fig. 5.3).
• Unscrew and replace the bulb “ B ” with a new one suitable for high temperatures
(300°C) having the following specifications: 230V, E14 and same power (check watt
power as stamped in the bulb itself) of the replaced bulb.
• Refit the protective cover “
C
”.
NOTE: Oven bulb replacement is not covered by your guarantee.
Fig. 5.3