16
wash setting
standard washing
1. Pull the door handle and put the laundry in the drum.
(Refer to Preparation to sort your laundry before it goes
into the drum.) Make sure no washing gets caught in the
door.
2. Close the door and press the
On/Off
button. Turn
the Programme Selection Dial to select your wash
programme.
3. Select the temperature, spin speed and other functions if
desired.
4. Add detergent into the detergent drawer. The quantity
of detergent will depend on the amount of laundry,
the degree of soiling and the water hardness. Use the
amount of detergent suggested on the packaging.
5. Press the
Start/Pause
button to start the washing.
6. The washing machine will sound when the programme is
complete.
before first use
Before washing your clothes for the first time, run a full wash programme first:
1. Connect the machine to the mains power supply and the water supply.
2. Put a small amount of detergent in the detergent drawer. Close the drawer.
3. Press the
On/Off
button.
4. Select a wash programme.
5. Press the
Start/Pause
button.
removing washing (once programme is finished)
• Open the washing machine door and remove your washing.
• Remove any foreign objects to avoid risk of rusting.
• Leave the door and detergent drawer open so that residual water can evaporate.
If the door is locked and you switched the washing machine off and then on - or if there’s a
power cut - it will stay locked for 5 seconds.
Door remains locked for 1 minute after wash stopped.
K914WM16
Favourite
Express
Speed Wash
Extra Rinse
Pre Wash
Spin
Temp.
Delay
Press 3 sec. to reload
/
Press 3 sec.
Colours
K914WM16_IB_RC_190902_grace.indd 16
2/9/2019 3:27 PM
