24
cleaning the filter net of the water supply hose
1. Turn the water supply off at the tap.
2. Turn the power off. Remove the water supply hose from the tap.
3. Manually remove the filter net located on the tap side of the water supply hose and clean using
a small brush (e.g. a toothbrush).
4. Return the filter net to its original position.
5. Re-connect the water supply hose to the tap and turn the tap back on, checking for leaks. Then
turn the power back on.
Be careful not to burn yourself while cleaning the drain filter. Water draining from
the filter compartment may be hot after a high temperature wash.
5. Turn the filter clockwise and screw the filter back into place.
6. Close the service flap.
cleaning the drain filter
Before cleaning the drain filter, first start the spin programme, then switch off and unplug the
washing machine.
1. Gently Open the Service Flap. Place a suitable container under the service flap to catch the
water.
Service
Flap
2. Carefully loosen the drain filter. Turn anti-clockwise until the water gently begins to run out, this
is normal.
3. Remove the filter once the water has stopped.
4. Remove any lint and debris before carefully replacing the filter.
Kenwood 7kg Washing Machine K714WM18 Manual.indd 24
21/06/2018 08:10
