37
GB
2. Choose a flat work surface for your
microwave away from heat sources such
as radiators or fires and away from cold
areas. The surface should be at least 85cm
above the floor. You should allow a 20cm
space all around the microwave and 30cm
above so that warm air can escape from
the vents during cooking – This microwave
is not designed to be built in.
3. Plug your microwave into a standard
household electrical socket. Avoid using
a socket that also has an adaptor and
other equipment plugged in. Do not use a
multi-adaptor.
4. Put the turntable support inside the
microwave and place the glass turntable
plate on top of the support. The turntable
support is shaped to sit securely on the
spindle. You must always use the turntable
plate and support whenever you use the
microwave.
getting ready
This microwave is designed for domestic use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents on the microwave, and the door closes properly. A dented or damaged
microwave could allow microwave energy to escape. Make sure that you have taken all the
packaging from the inside of the microwave. Please dispose of the plastic wrappings or bags
safely and keep out of the reach of babies and young children.
30cm
20cm
20cm
5. To protect your work surface, we
recommend that you fix some non-slip
cushion pads (not included) to the underside
of the microwave.
Underside View
Remove the turntable plate and turntable
support before turning the microwave
upside down.
K20MSS10E_IB_5L_160914_will.indb 37
14/9/2016 2:19 PM