Kenwood K-525, Руководство по обслуживанию

Страница: 2 / 36

2
K-525
Caution Dealer’s Lock
1. Setting
To set the unit to Dealer's Lock, hold down the [STOP] key on
the main unit, and press the [POWER] key on the remote
control unit. CD ejection is disabled.
2. Canceling
To cancel Dealer's Lock, hold down the [STOP] key on the
main unit, and press the [POWER] key on the remote control
unit.
Memory back up function
Even when the power plug is unplugged from the mains outlet,
the setups of the unit are retained for about a day. The backed
up setups are as follows.
Sound and system setups
• Input source selection
• Volume setting
• Input level setting
• D-BASS and TONE settings
• TIMER SET setting
• DIMMER setting
• DISP. SAVER setting
• A.P.S. setting
• Rec Out LEVEL setting
Tuner setups
• Preset stations
• Tuning mode (Auto/manual tuning)
• Receiving frequency
Caution for transport or movement
Before transporting or moving the system, prepare it as de-
scribed below.
(1) Disconnect the external components including the USB
device, and also take out the disc.
(2) Press the [CD /II] key, and wait to confirm "NO DISC" is
displayed.
(3) Wait a while, and then turn the system OFF.
(4) If any other external component is connected, make sure
that it is turned OFF before disconnecting the connection
cable.
Resetting the system
The system may malfunction due to unplugged and plugging of
a cable while the system is ON or to an extraneous cause. In
this case, reset the system with the following steps. Resetting
the microcomputer results in erasing the setups of the system
and returns it to the factory shipped condition.
(1) Unplug the power plug from the mains outlet.
(2) While pressing and holding [ ] on the main unit, unplug
the power cord and plug it again.
"INITIALIZE" is displayed. This unit is reset.
The marking this product has been classifed as Class 1. It means that
there is no danger of hazardous radiation outside the product.
Location: Back panel
The marking of products using lasers
LASER PRODUCT
CLASS 1
Information on Disposal of Old Electrical and Electronic
Equipment and Batteries (applicable for EU countries that
have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out
wheeled bin) cannot be disposed as household
waste.
Old electrical and electronic equipment and
batteries should be recycled at a facility capable of
handling these items and their waste byproducts.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help
conserve resources whilst preventing detrimental e
ects on our health and the environment.
Notice: The sign "Pb" below the symbol for batteries
indicates that this battery contains lead.
Made for iPod, and Made for iPhone mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with
iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
Manufactured under license from DTS Licensing Limited. DTS
and the Symbol are registered trademarks, & DTS Surround
Sensation and the DTS logos are trademark of DTS, Inc.
Product includes software.
C
DTS, Inc. All Rights Reserved.
Windows Media is a registered trademark or trademark of
Microsoft Corporation in the United States and other
countries.