Kenwood FDP65, Инструкция по эксплуатации

Страница: 11 / 192

5
O
Once your drink has reached the desired
consistency, you can use the pulse (P) to
ensure all ingredients are thoroughly blended.
Hints and Tips
O
Note that when the bottle is filled to max
capacity (400ml), this is approximately two
servings.
O
If you do not intend to consume your drink
immediately, keep it refrigerated.
O
Ensure your drink is thin enough to be able
to drink from the dispensing lid. To make a
thinner drink add more liquid.
O
After blending, some drinks may not be
completely smooth due to seeds or the
fibrous nature of ingredients.
O
Some drinks may separate on standing,
therefore it is best to drink them straight
away. Separated drinks should be stirred
before drinking.
O
When the dispensing lid is fitted always keep
the bottle upright.
Using the drinking lid
1 Fit and lock the lid by turning clockwise.
2 When you want to drink, simply flip open the
lid cover. The drink can be consumed straight
from the bottle.
21
Juice Extractor
(if supplied)
a
Pusher
b
Juicer lid
c
Pulp remover
d
Filter drum
e
Bowl
f
Juicing spout
To use the juice extractor
1 Fit the juicer bowl to the power unit, turn
clockwise until it locks - the spout should
be situated to the left side when the bowl is
fitted correctly.
2 Place the pulp remover into the filter drum -
ensuring the tabs locate with the slots in the
bottom of the drum.
3 Fit the filter drum
4 Fit the attachment lid - turn clockwise until
it locks. Your juicer will not operate if the
bowl or lid are not fitted correctly into the
interlock .
5 Place a suitable glass or jug under the juice
outlet.
6 Cut the food to fit the feed tube.
7 Switch on and push down evenly with the
pusher - never put your fingers in the feed
tube. Process fully before adding more.
O
After adding the last piece, let the juicer run
for a further 30 seconds to extract all the
juice from the filter drum.
important
O
If the juicer starts to vibrate, switch off and
empty the pulp from the drum. The juicer
vibrates if the pulp becomes unevenly
distributed.
O
Some very hard foods may make your juicer
slow down or stop. If this happens switch off
and unblock the filter.
O
Switch off and clear the pulp collector
regularly during use.
Hints and Tips
O
Before processing remove stones and pips
(eg pepper, melon, plum) and tough skins
(e.g. melon, pineapple). You do not need to
peel or core apples and pears.
O
Use firm, fresh fruit and vegetables.
22
Express Dice
(if supplied)
a
Dicing disc
b
Dicing grid
c
Dicing pusher
Important: the dicing disc is designed only to be
used with the dicing attachment.
To use the Express Dice
1 Fit the drive shaft and bowl onto the power
unit.
2 Add the dicing disc and fit the lid.
3 Fit the dicing grid into the feed tube.
4 Use the dicing pusher to process food items
through the dicing grid.
Hints and Tips
O
To assist with processing place both hands
on top of the pusher and press down firmly.
O
For best results, use fresh fruit and
vegetables.
O
To prevent the food from jamming do not
pack the food tightly in the feed tube –
ideally the food should be cut no larger than:
50 × 30mm