18
KDC-MP738U/W7541U
/W7541UY/X792/X8009U
keys in 3 steps: L15
↔
0
↔
R15. (Default value: 0)
• Bass/Middle/Treble Level are adjusted by the VOL knob
and [
] / [
] keys in 3 steps: -8
↔
0
↔
8. (Default value:
0)
• HPF Front / Rear is adjusted by the VOL knob and [
] /
[
] keys in 2 steps: Through
↔
180Hz. (or 220Hz) (Default
value: Through)
• LPF Sub Woofer is adjusted by the VOL knob and [
] /
[
] keys in 2 steps: 60Hz (or 50Hz)
↔
Through. (Default
value: Through)
• Sub Woofer Phase is adjusted by the VOL knob and [
]
/ [
] keys in 2 steps: Reverse
↔
Normal. (Default value:
Normal)
• Volume Offset (other than the internal AUX) is adjusted
by the VOL knob and [
] / [
] keys in 2 steps: -8
↔
0.
(Default value: 0)
• Volume Offset (the internal AUX) is adjusted by the VOL
knob and [
] / [
] keys in 3 steps: -8
↔
0
↔
+8. (Default
value: 0)
• Loudness ON/OFF is adjusted by the VOL knob and [
]
/ [
] keys in 2 steps: OFF
↔
ON. (Default value: OFF)
• Dual Zone ON / OFF is adjusted by the VOL knob and
[
] / [
] keys in 2 steps: OFF
↔
ON. (Default value:
OFF)
• Bass f / Bass Q / Bass EXT / Middle f / Middle Q / Treble
f are not displayed in the audio adjustment menu.
• SYSTEM Q (dB EQ) curve selection is not displayed in
the audio adjustment menu.
●
MENU
• Press the [FNC] key briefly to make the multi-function
display and press the [ ] key brie
fl
y to enter the MENU.
• Press the remote control [DNPP/SBF] key and the
[DIRECT] key to enter the MENU.
• Continuous forwarding by remote control is prohibited.
• The initial item in TUNER source MENU source during
the Test mode shall be selectable between Seek ON and
OFF. (E / E2 type)
• Only in the Test mode, it shall be made possible to show
“ROM Write Mode” and “ROM Read Mode” items in the
STANDBY source MENU to allow the ROM data transfer
process.
●
ROM data transfer
This function is used to transfer E2PROM data (installer
memory) inside of the front-end to mother E2PROM (X34:
IC520) of the backup, and to transfer the data back from
the mother E2PROM (X34: IC520) to the E2PROM of the
front-end.
How to transfer ROM data
q
Enter the Test mode (All lights go on).
w
Press [FNC] key brie
fl
y while all lights are on to enter
in the Menu mode.
e
Select “ROM Read Mode (Mother
→
Front-end)” or
“ROM Write Mode (Front end
→
Mother)”, and press
and hold [ ] key for one second to turn Mode ON.
Operation
Display
Description
Start resetting by
pressing “[1] key
+ [3] key”
All lights ON
Test mode ON
Press [FNC] key
to select [Menu]
mode.
“ROM_Read_Mode”
Mother
→
Front-end
Process to transfer data
“ROM_Write_Mode”
Front-end
→
Mother
Process to transfer data
(In the above
ROM Read Mode)
Press and hold
[ ] key (for one
second) to select
Yes.
“ROM_Reading…”
Mother
→
Front-end
ROM data transfer in progress
“ROM_Read_OK”
Mother
→
Front-end
ROM data transfer OK
“ROM_Read_NG”
Mother
→
Front-end
ROM data transfer NG
(In the above
ROM Write Mode)
Press and hold
[ ] key (for one
second) to select
Yes.
“ROM_Writing…”
Front-end
→
Mother
ROM data transfer in progress
“ROM_Write_OK”
Front-end
→
Mother
ROM data transfer OK
“ROM_Write_NG”
Front-end
→
Mother
ROM data transfer NG
Example of detail display: Display in the case of E2PROM
Write
CD Read : 1
Rom Write Mode
Rom Read Mode
Security Set
MENU
Rom Write Mode
Rom Writing ...
Rom Write OK
Rom Write NG
NO YES
Press [PLAY] / [PAUSE]
for one second.
When [FNC] is
pressed briefly
and when No
is selected
F/E
→
Mother
NG to transfer ROM data
F/E
→
Mother
OK to transfer
ROM data
[FNC] key is inhibited during
Writing and Reading operations
When YES is selected and
[PLAY] / [PAUSE] is pressed briefly
TEST MODE