DVF-5020
10
DISASSEMBLY FOR REPAIR
3. Insert the pickup FPC into connector FP5201 on the mod-
ule C.B.A.
2-14 Optical Pickup Tilt Adjustment
4. Remove the solder from the pickup FPC's soldered short-
circuit.
5. Adjust the optical pickup tilt after removing the solder.
(Refer to page10/2-14 Optical Pickup Tilt Adjustment.)
2-13 Disassembling the Spindle Motor Unit
1. Remove the three screws.
Note
Be sure to adjust the optical pickup tilt after replacing the
spindle motor unit.
DVF-5020(k)
COVER1,1p(
99.11.1
4:54
PM
y [ W 10