DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y)
Set Up functions
Operations
34
Digital Audio Out
PCM :
Choose this setting for all connection scenarios, ex-
cept the Dolby Digital or DTS receiver or decoder con-
nection.
Dolby Digital :
Choose this setting if you connected Dolby
Digital receiver or decoder to your DVD player.
DTS :
Choose this setting if you connected DTS receiver or
decoder to your DVD player
Except for U.S.A. , Canada and U.S. Military
MPEG/DTS :
Choose this setting if you connected DTS re-
ceiver, decoder or MPEG audio to your DVD player.
1
Press Cursor up/down (
5
/
∞
) keys on the remote
to select "Digital Audio Out" on the set up menu
display, then press the ENTER key.
(Digital Audio Out display appears.)
2
Press Cursor up/down (
5
/
∞
) keys on the remote
to select specific Digital Audio Out mode, then
press the ENTER key.
÷
Press
6
key to resume normal playback.
Dynamic Range
1
Press Cursor up/down (
5
/
∞
) keys on the remote
to select "Dynamic Range" on the set up menu dis-
play, then press the ENTER key.
(Dynamic Range menu appears.)
2
Press Cursor up/down (
5
/
∞
) keys on the remote
to select Dynamic Range mode (on or off), then
press the ENTER key.
÷
Press
6
key to resume normal playback.
MULTI CONTROL
ENTER
DV-603/DVF-3060
DVF-3060K
MULTI CONTROL
ENTER
DV-603/DVF-3060
DVF-3060K
MULTI CONTROL
ENTER
DV-603/DVF-3060
DVF-3060K
MULTI CONTROL
ENTER
DV-603/DVF-3060
DVF-3060K
Note
Note
When the DTS of Digital Audio Out or the Dolby Digital
setting and the format recorded on the disc are different
from each other, audio may not be put out. Please switch
according to the indication on the disc.
DTS disclaimer clause
When playing DTS-encoded (CDs, LDs, DVDs), excessive
noise will be exhibited from the analog stereo outputs. To
avoid possible damage to the audio system, the consumer
should take proper precautions when the analog stereo outputs
of the DVD player is connected to an amplification system.
To enjoy DTS Digital Surround™ playback, an external 5.1
channel DTS Digital Surround™ decoder system must be
connected to the digital output (S/P DIF, AES/EBU, or
TosLink) of the DVD player.