Kenwood DPX-U514BT, Инструкция по эксплуатации

Страница: 19 / 50

ENGLISH
19
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard.
•
Adjust the volume to the optimum level.
•
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears. Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND SERVICE”
appears. Send the unit to the nearest service center.
The unit does not work at all. Reset the unit. ( 3 )
R
adio
•
Radio reception is poor.
•
Static noise while listening
to the radio.
•
Connect the antenna firmly.
•
Pull the antenna out all the way.
CD / USB / iPod
Disc cannot be ejected.
Press and hold
M
to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit. (
3 )
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as
you intended them to play. Playback order is determined when files are recorded.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct. This is caused by how the tracks are recorded.
Correct characters are not
displayed (e.g. album name). This unit can only display uppercase letters, numbers,
and a limited number of symbols.
“NA FILE” Make sure the disc contains supported audio files.
(
21 )
“NO DISC” Insert a playable disc into the loading slot.
“TOC ERROR” Make sure the disc is clean and inserted properly.
Symptom Remedy
CD / USB / iPod
“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult
your nearest service center.
“READ ERROR” Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
“NO DEVICE” Connect a USB device, and change the source to USB again.
“COPY PRO” A copy-protected file is played.
“NA DEVICE” Connect a supported USB device, and check the connections.
“NO MUSIC” Connect a USB device that contains playable audio files.
“iPod ERROR”
•
Reconnect the iPod.
•
Reset the iPod.
ANDROID
•
Sound cannot
be heard during
playback.
•
Sound output only
from the Android
device.
•
Reconnect the Android device.
•
If in [ HAND MODE ], launch any media player application
on the Android device and start playback.
•
If in [ HAND MODE ], relaunch the current media player
application or use another media player application.
•
Restart the Android device.
•
If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 21 )
Cannot playback at
[
BROWSE MODE ].
•
Make sure KENWOOD MUSIC PLAY APP is installed on the
Android device. ( 8 )
•
Reconnect the Android device and make the appropriate
setting in [ ANDROID SETUP ]. ( 9 )
•
If this does not solve the problem, the connected Android
device does not support [ BROWSE MODE ]. ( 21 )
“NO DEVICE” or
“READING” keeps
flashing.
•
Switch off the developer options on the Android device.
•
Reconnect the Android device.
•
If this does not solve the problem, the connected Android
device does not support [ BROWSE MODE ]. ( 21 )
JS_KWD_DPX_U5140BT_MN_EN_1.indd 19 JS_KWD_DPX_U5140BT_MN_EN_1.indd 19 17/9/2014 3:21:54 PM 17/9/2014 3:21:54 PM