DPX-MP4070/MP4070B
10
●
How to enter the test mode
• In order to enter the test mode, while pressing down [ATT]
+ [WOW] keys simultaneously, press [SRC] key.
●
Test mode conditions
• The test mode starts up when STANDBY source is selected.
• The volume value is –10dB. (30 on the display)
• Beep prohibited.
• All lights displayed. (3-color LED lights up for all three col-
ors. (white lighting))
• WOW : OFF
• EQ : Natural
●
Test mode (Source : CD)
• When starting disc loading, tracks will be played starting
with the Track No. 9.
• The key operations below will be conducted only when the
source is CD.
Even when changes occur in the track number being played
with the other sources, the play condition will persist.
Preset [1] key for Track No. 19
Preset [2] key for Track No. 5
Preset [3] key for Track No. 15
Preset [4] key for Track No. 14
• [
] key is to be used for selecting preset tracks only. (Re-
fer to the table below.)
• [
] key is to be used for down selection, as with regular
operation.
Current track
Track to be searched
No. 1~No. 8, No. 14, No. 16~Max
No. 9
No. 15
No. 10
No. 11
No. 12
No. 13
No. 14
• While the source is being displayed, clicking once on the
[EQ/AUD] key will cause the unit to enter Adjustment Mode.
When [1] key is pressed: Flat
When [2] key is pressed : Full-boost
When [3] key is pressed : Full-cut
• The settings for Q, Feq, and Ex are fixed.
Q
2.0
Bass
Feq
150Hz
Ext
ON
Mid
Q
2.0
Feq
1kHz
Treble
Feq
10kHz
●
Test mode (Audio adjustment)
• While the source is being displayed, long-clicking on the
[EQ/AUD] key will cause the unit to enter Adjustment Mode.
By toggling on the [FM] and [AM] key, the items below can
be selected and adjustments can be made with [
] and
[
] keys.
The balance adjustment is set for three steps
: RIGHT
↔
CENTER
↔
LEFT (L15, R15)
The fader adjustment is set for three steps
: FRONT
↔
CENTER
↔
REAR (F15 and R15)
●
Test mode (DC offset detection)
• When DC error detection is carried out during the Test Mode,
the unit shuts down without writing the error information to
the EEPROM. The other cases will be the same as the DC
offset specifications.
●
Test mode (Display of DC offset detection results)
• When in this mode, the mode for “Display of DC offset de-
tection results” will be added in the MENU items at the time
when Test Mode Standby is the source. This will make it
possible to confirm results with presence-or-absence de-
tection.
MENU selection : DIMMER adjustment
→ … →
(NAVI ATT
ON/OFF)
→
(CODE STBY)
→
Display of DC offset detec-
tion results
• Display
DC offset detected : DC Err
DC offset not detected : DC OK
✳
The detection information in the EEPROM can be forcibly
cleared by pressing [
] or [
] key for more than two
seconds while the DC offset detection (DC Err) is being
displayed. In this case, the display will be for DC offset not
detected. (DC OK).
TEST MODE
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
