English
|
7
Function setting Operation
The basic operating procedure for using this
function is described below. The individual function
items are covered in the operating procedures.
1
Select the source
Press the [SRC] button.
Function items vary from source to source.
2
Enter Function setting mode
Press the [VOL] knob.
3
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Repeat the operation until your desired setup item
is selected.
Operation example:
[VOL]
[ ]
[VOL]
[ ]
Settings
Seek Mode
Auto Memory
…
Audio Control
…
1
1
2
4
3
1
3
2
4
1 sec.
Exit
In this manual, the above selection is indicated as
Select “Settings”/ “SETTINGS”
>
“Seek Mode”/
“SEEK MODE”.
4
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
Common Operation
Power and source select
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
Press the [SRC] button each time switches
between sources.
Tuner (“TUNER”)
➜
USB (“USB”) or iPod (“iPod”)
(DPX-U6120/ DPX-U5120 only)
➜
CD (“CD”)
➜
Auxiliary input (“AUX”)
➜
Standby (“STDBY”/
“STANDBY”)
➜
Tuner...
DPX-U6120 DPX-U5120
Press the [iPod] button to switch the source to
iPod.
Press the [SRC] button for at least 1 second to
turns the power OFF.
⁄
•
The SRC Select mode can be set in “Source Select” of <Initial
Settings> (page 30). (DPX-U6120 only)
•
When an optional accessory is connected, the source name
for each device appears. (DPX-U6120 only)
•
When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
Volume
Turning the [VOL] knob adjusts the sound
volume.
B64-4805-00_01_DPXU6120_M_en.indd 7
11/02/02 15:07
