11
DPX-MP3110/MP3110S
DPX-MP5110U/MP5110US
TEST MODE
■
Example
Key
Description of display
Description
5
Disc Eject times display
E
J
C
X
X
X
X
X
Disc Eject times display. MAX 65535 (times)
CD=EJT
■
5
While disc EJECT times is displayed, press and hold for 2 seconds
or longer to clear disc EJECT times. (This is to clear only the display
media.)
A symbol “
■
” in the key column indicates that the key should be pressed and held.
■
How to enter the Test mode
Procedure
Note
Press and hold the [1] key and [3] key and reset.
While “– – – –” is displayed, power can be turned ON for 30 minutes.
All lamps blinks when it is detected that the sub-clock resonator is disconnected.
Do not display “CODE_OFF”, “CODE_ON” and “CODE_NG” when power is ON.
When having started up in the Test mode, change the LINE MUTE inhibition time from 10 seconds to 1 second.
In the Test mode, do not write security code by using a security jig.
In the Test mode, do not write serial number by using a serial-number-writing jig.
In the Test mode, do not write the detection information in the E2PROM even if a DC error is detected.
Do not operate the DEMO mode in the Test mode, CD Mechanism Error Log Information Clear Mode, or DC Error Detection Information Clear
Mode.
Also, in the above modes, do not display DEMO ON/OFF switching items in the MENU.
In the Test mode, the forced disc ejection operation is prohibited.
■
How to clear the Test mode
Procedure
Note
Reset, Momentary power down, Acc OFF and Power OFF
Clearing the Test mode
■
Test mode default condition
Description
Default values
Source
Standby
Display
Display lights are all turned on.
Volume
-10dB (“30” is displayed.)
LOUD
OFF
CRSC
OFF regardless of having/not having the switching function.
AUX
ON
System Q
NATURAL
Beep
Sound on any time when the key is pressed brie
fl
y.
Preout
Rear
SWPRE
SUB WOOFER