13
DPX301
DPX-MP2090/MP2090S
TEST MODE
• Sub Woofer Phase is adjusted by the VOL knob and [
] /
[
] keys in 2 steps: Reverse
↔
Normal.(Default value:
Normal)
• Volume Offset is adjusted by the VOL knob and [
] / [
]
keys in 2 steps: -8
↔
0. (Default value: 0)
• Loudness ON/OFF is adjusted by the VOL knob and [
] /
[
] keys in 2 steps: OFF
↔
ON. (Default value: OFF)
• Bass f / Bass Q / Bass EXT / Middle f / Middle Q / Treble f
are not displayed on the audio adjustment mode.
●
MENU
• Press the [Q] key to enter the MENU.
• Press the remote control [DNPP/SBF] key or the [DIRECT]
key to enter the MENU.
• Continuous forwarding by remote control is prohibited.
●
Backup current measurement
If reset while in Acc OFF (Back Up ON) condition, MUTE
terminal goes off 2 seconds later, rather than 15 seconds.
(During this time, the CD mechanism does not function.)
●
Special displays while all lights are on
When all lights are on with STANDBY source, if the follow-
ing keys are pressed, the following messages are displayed.
[1]
Version is displayed (forwarding).
key
(Display) TYPE : x_ _ _
→
(“x" is displayed in hexadecimals)
5 3 0 K – 1 . 0 2
→
(“development ID” – “version”)
all lights on
→
∗
TYPE indicates
µ
-com destination, and shows real-time
condition of the destination terminal.
[2]
Serial No. is displayed (8 digits).
key
(Display) xxxxxxxx
[3]
Key pressed briefly: Power ON time is displayed.
key
While Power ON time is displayed, press and hold for 2
seconds to clear the Power ON time.
(Display) PON_0Hxx (00~50 is displayed for “xx”.
When less than 1 hour, display by
increment of 10 minutes)
xxxxx (00001~10922 is displayed for “xxxxx”)
MAX 10922 (hours)
[4]
Key pressed briefly: CD operation time is displayed.
key
While CD operation time is displayed, press and hold for
2 seconds to clear the CD operation time.
(Display) CDT_0Hxx (00~50 is displayed for “xx”.
When less than 1 hour, display by
increment of 10 minutes)
xxxxx (00001~10922 is displayed for “xxxxx”)
MAX 10922 (hours)
[5]
Key pressed briefly: Number of CD EJECT time is displayed.
key
While the CD EJECT times is displayed, press and hold
for 2 seconds to clear the CD EJECT time.
(Display) EJCxxxxx
MAX 65535 (times)
[6]
Not used.
key
[FM]
ROM correction version is displayed.
key
(Display) ROM_R123
When E2PROM is not installed: ROM_ERR_
When not written in: ROM_R– – –
When data not matching: ROM_R
∗∗∗
[
]
AUDIO data initialization
key
(Display) AUD_INIT
[
]
Key pressed briefly: Forced Power OFF data displayed.
key
While the forced power OFF data is displayed, press and
hold for 2 seconds to clear the data.
(Display) POFF_ – – – (No Forced Power OFF)
←
Fixed display
[
]
Key pressed briefly: CD information display mode ON/OFF.
key
While in CD information display mode, press and hold for
2 seconds to clear all CD information.
∗
Please refer to the next table.
CD information display mode
I2C communication condition display
(Display) I2C_OK_ _
NG
[AM]
CD mechanism error log display
key
(switched by [
] / [
] keys)
↑
(Display) MCERR1: xx
↔
MCERR2: xx
↔
MCERR3: xx
↔
MCERR1: xx
↔
(“– –” or the error code is displayed for “xx”)
